This is the replacement charcoal filter for your microwave. It is silver and black in color and measures approximately 10 inches by 2 ½ inches. The charcoal filter removes cooking odors from the air ...
This is a genuine replacement 40 watt bulb for a microwave. The bulb is meant to light up the underside of the microwave or inside of your microwave when the door is open or during use. If your bulb i...
This turntable motor is for microwaves.
The turntable motor rotates the glass tray inside the microwave oven.
Because high-voltage capacitors in a microwave can retain a lethal electrical charge...
Ask our experts a question about this model and we'll get back to you as soon as possible!
13 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Barbara
June 16, 2021
My door handle just broke off. Can i buy a separate door handle and not the entire door?
For model number JVM3160DF3WW
Hi Barbara,
Thank you for your question. The handle is available separately. The part number listed for the handle is PS8754173. To place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Bob
December 8, 2019
Stove top light on right side of microwave as you face the unit will not work. Have replaced the bulb. Left light still works fine. Is there an easy way to correct the problem or does it need a new socket or what?
For model number JVM3160DF3WW
Hello Bob, thank you for your question. Yes, the socket may need to be replaced if the bulb was replaced and didn't fix the issue. We would recommend replacing light socket Part #: PS8753748. I hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Richard
March 6, 2020
After programing the microwave to cook and push start, it attempts to start then cuts off? Why?
For model number JVM3160DF3WW
Good Day Richard. Thank you for your question in regards to your unit (Model Number JVM3160DF3WW). Based on our research, this may be the result of the Electronic Control Board (PartSelect Number PS11762558) being worn out and having to be replaced. You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Ron
January 21, 2020
Why does the unit keep blowing the 20amp fuse ?
For model number JVM3160DF3WW
Hello and thank you for writing.
Your microwave has what engineers call interlock switches PS8754454 and PS8754455 that disable the oven when the door is open. Malfunctioning interlock switches or a badly misaligned door can cause the fuses to blow. It's also possible the microwave's cooling fan may have failed, leading to overheating and melting the element in the fuse.We hope this helps. Please contact us anytime if you require further assistance.
Was this helpful?
Thank you for voting!
Troy
February 9, 2020
Fan and lights work turn microwave on and it shuts down
For model number JVM3160DF3WW
Hello and thank you for writing.
It certainly sounds like it could be a faulty diode PS12342226 and/or possibly a malfunctioning switches PS8754454 and PS1019163 you should check the part(s) for signs of damage or test with a multimeter, and replace the part(s) as needed. We hope this helps. Please contact us anytime if you require further assistance.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Open the front cover by pushing it at the top (where it says “Push”), lifting up and pushing back on top edge of the old filter. Pull it out. Installing the new one is basically just the reverse of those steps! That simple.
Old filter did seem to be a little thicker (filter material), but the new one was the exact same dimensions, so it went in properly. Wish the filter material was white, so you knew just how dirty it was actually getting. But... :-D
1. Unplug unit 2. Open door, remove two screws above the top trim piece, slide and remove trim. 3. Remove screw behind control board and top left corner, then release from position. 3b. Unplug all wire terminations and set control panel aside. 4. Remove two screws securing latch board, lift and rotate board out of position, remove three micro switches, xfer monitor switch actuator from lower pin in old board and insert in new. Install new door switches and reverse procedure to complete repair.
Note 1. Take care to located new latch board so holding tabs line up, pass through frame, and openings for door tangs line up with openings in frame before securing with screws.