JVM1850SM4SS General Electric Microwave - Overview

Diagrams for JVM1850SM4SS

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Light Bulb - 40W 130V – Part Number: WB36X10003
$27.89
Special Order
Light Bulb - 40W 130V
★★★★★
★★★★★
(4)
Part #WB36X10003
This 40-watt microwave light bulb is a genuine replacement component designed to provide interior illumination for compatible GE microwave models. Engineered to withstand the high temperatures within the microwave cavity, it allows users to monitor food during cooking without opening the door, preserving heat and cooking efficiency. The bulb’s compact design ensures a secure fit and consistent lighting performance. Replacement is typically straightforward and involves accessing the light housing inside the microwave. Always disconnect power before installation to ensure safety.
Light Socket - 250V 75W – Part Number: WB08X10016
$35.95
Special Order
Light Socket - 250V 75W
★★★★★
★★★★★
(2)
Part #WB08X10016
Light bulb not included.
Flat Cab Mounting Bolt – Part Number: WB01X10180
$16.95
Special Order
Flat Cab Mounting Bolt
Part #WB01X10180
This part is the replacement flat cab mounting bolt for your microwave. The bolt is approximately 4 inches long. It is designed to hold the microwave in place in your cabinet. The main reason to replace this bolt, would be if the old bolt is stripped or missing, and the microwave will not stay secure in the cabinet. This is an OEM part sourced directly from the manufacturer, and it is sold individually.
Grease Filter – Part Number: WB06X10596
$81.10
Special Order
Grease Filter
★★★★★
★★★★★
(1)
Part #WB06X10596
This metallic vent hood filter collects grease particles in the air from cooking. Sold individually.
Glass Light Lens – Part Number: WB36X10071
$28.20
Special Order
Microwave Halogen Light Bulb – Part Number: WB36X10213
$36.73
Special Order
Microwave Halogen Light Bulb
★★★★★
★★★★★
(1)
Part #WB36X10213
This halogen light bulb is an inch and a half long. Carrying 120 volts and 20 watts, it is used with some microwave ovens.
Monitor Door Switch – Part Number: WB24X830
$58.30
Special Order
Glass Turntable Coupler – Part Number: WB06X10144
No Longer Available
Glass Turntable Coupler
Part #WB06X10144
This part accepts a D-shaped motor shaft.
Charcoal Filter – Part Number: WB02X10733
$153.66
Special Order
Charcoal Filter
★★★★★
★★★★★
(1)
Part #WB02X10733
Keep your kitchen air fresh with this charcoal filter for your microwave. It traps grease and odors while you cook, helping your microwave vent properly. It’s easy to install—just slide it into place. Be sure to check your microwave’s model number to make sure it fits.
Glass Cooking Tray – Part Number: WB49X10063
$117.41
Special Order
Glass Cooking Tray
Part #WB49X10063
This tray rotates in your microwave ensuring more even temperatures and is approx.14-1/2 inches in diameter.

Manuals & Care Guides for JVM1850SM4SS

Click to download

Questions And Answers for JVM1850SM4SS

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Anthony - For model number JVM1850SM4SS
February 11, 2024
Where is the charcoal filter location on this model? How do I get access to the filter? Whst is the part number snd cost for the filter?
Chris Boyle Profile
Hello Anthony, Thank you for your inquiry. The charcoal filter is located behind the vent grille for this model. On the top of the vent grill, there will be 2 screws holding it in place. Remove the screws and remove the vent grill to access the filter. The part number is PS224009 and the current cost is available on our website. We hope this helps.
$153.66
Special Order
Charcoal Filter
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
Barney - For model number JVM1850SM4SS
August 31, 2023
No power?
Chris Boyle Profile
Hi Barney, thank you for contacting us. First, you may need to make sure that there is power coming to the unit. The electrical outlet may not be getting power. To determine if the outlet is getting power, try plugging something else into the outlet. If the outlet is not getting power, check the home circuit breakers or fuses. If that is not causing the issue then you may need to check the thermal fuse, part number PS239811, as it is most likely faulty and may need to be replaced. Let us know if you have further questions!
No Longer Available
Thermal Fuse
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the JVM1850SM4SS

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
light worked, timer and control pad worked, but no turntable, no heat, no noises of any sort, just didn't start up
320 of 387 people found this instruction helpful.
  • Marla from Arlington, TX
  • Easy
  • Less than 15 mins
  • Screw drivers
Noted on partselect.com that someone else with this problem, found it to be secondary door switch. There are three door switches in this model, but online info noted that one of the three might feel "soft" (in my case, one switch clicked in a rather "jiggly" way, the other two were strong decisive clicks.) To access the door switches on this model was the only difficult part. First use a torx bit to remove the two torx screws below the latches inside the microwave. This frees the latching part inside, that holds the door switches, which you will remove after you take off the control panel. The top grill has to come off before you can remove the door panel. Remove the screws above the grill, on the microwave top cover, The grill on this model is covered with a panel that moves out when it vents. After removing the two top screws, the covered grill vent slides left to remove. Be careful, as the sliding tabs are plastic. Wiggle and jiggle it, to slip it off. Below the removed grill, is a small metal grill with one screw in lower center. Remove that screw, and wiggle that out. You'll then see the one screw that holds on the control panel. Remove this screw, and lift the control panel up to remove. Again, go slowly and gently, as the bottom tabs holding the control panel in, are also plastic and easily broken. Lay the control panel on something, (I used the coffee maker) and pull out the wire bundles tucked on the left, that are attached to the latching panel. Wiggle the latching panel gently to lift it up off of it's plastic tabs and pull it out towards you, so you can see the three door switches. Each switch (part number WB24X829) has a little black switch on it. Feel each switch with either your finger, or a screwdriver to see which one doesn't "click" strongly. The weak one is the one you will replace. The door switches are fitted into a tab, and plugged into their wires. Remove the defective switch, pull out the wires, and replace it with the new switch, plugging back the wires, and slipping it back into it's plastic tabs. Then put everything back together in reverse order. The entire job took me fifteen minutes EXCEPT for figuring out how to slide off the upper grill, which I have told you. A repairman would have cost $150, the part was $18. AND, there's a good chance, the other two switches will get "used up" in the next year or so as well, so I'll be ready next time. Thank you, Partselect, why work all day, to make money, only to give it to somebody else, for fifteen minutes of work. All I needed was the knowledge.
Was this helpful?
Thank you for voting!
Light bulb out, tried to remove, lamp socket broke
222 of 270 people found this instruction helpful.
  • Gene from Urbana, IL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Above the stove mounted microwave. I dropped the lens cover from under the bulb and tried to remove the bulb. The bulb separated from the base. I tried to remove the base with a pliers and the lamp socket broke. I ordered the parts and dropped the bottom cover of the unit down (5 screws). Removed 1 screww from the lamp socket, unplugged t he wires and took it out. Simply replaced socket, fastened bottom cover of microwave, installed new bulb and closed lens cover.
Was this helpful?
Thank you for voting!
bulb had broken off in base that was still screwed into socket
93 of 109 people found this instruction helpful.
  • william from san antonio, TX
  • A Bit Difficult
  • 15 - 30 mins
  • Pliers, Screw drivers
At first I tried to use pliers to unscrew the base,very uncomfortable working position,upside down and backwards(the microwave is installed over the range top)very limited space for your body and arms to manuver and you really cant see the base,all of this took place after the breaker was turned off ofcourse,finally figured out that you c an drop the entire bottom housing of the microwave by unscrewing 6 screws and the light sockets are easily accessable once you lower it,take out 1 retaining screw ,remove the entire socket and unscrewed the broken base and replaced the bulbs,I said bulbs,there is no sense in having to replace another bulb in who knows how long since only one had burned out but they were both the same age
Was this helpful?
Thank you for voting!