This ceramic microwave fuse is just over an inch in length. It is white in the center, and metal on both ends. This is a 20-amp fuse, and is used to power your microwave. If the touch pad on the micro...
The rotating ring in your microwave rests under the microwave plate, and allows it to rotate when the microwave is running. It is a round plastic ring with 3 wheels spaced out around the perimeter. If...
This part is the replacement high-voltage diode for your microwave. It is approximately 3 inches long and is sold individually. The high voltage diode is an electrical current control device inside yo...
There are two different couplers (also known as a turntable shaft) that can be used for this tray - a male D-shaped shaft and a female D-shaped shaft. The couplers are sold separately.
This is the replacement damper bracket for your microwave. It is made of plastic and is approximately 11 inches wide and 3 inches long. The damper bracket attaches to the outer cabinet and directs air...
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Donald
February 16, 2020
How does panel that covers the door handle screws come off?
For model number JVM1540DM1WW
Hello Donald,
Thank you for your question. To take apart your door, you would use a putty knife to gently pop the back cover from the front panel of your door. It is held in with little tabs that go all around the perimeter of your door. Once you have that back cover off, you should be able to see your screws. If you do not see your screws right away, you would just have to gently pop off your choke the same way you popped off your cover. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Nona
July 31, 2021
Can i get a replacement keypad for this model
For model number JVM1540DM1WW
Hello Nona, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Control Panel PartSelect Number PS1480859. Good luck with your repair!
I am missing the exterior upper grille for this model bought a house and this works perfectly except grille is missing thanks it is a 1.5
For model number JVM1540DM1WW
Hello Robert, thank you for writing. The correct part number for your model is PartSelect Number PS1480860. We hope to hear from you soon.
Was this helpful?
Thank you for voting!
Eileen
December 7, 2022
Night light won't shut off. I press button and it says High, Low and then off but doesn't change to low or off.
For model number JVM1540DM1WW
Hi Eileen, thank you for reaching out. To turn the night light off, you will need to press the Surface Light button three times. If this does not help, there could be an issue with the light socket, part number PS230550. It is also a good idea to check the control panel and the control board. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.
Was this helpful?
Thank you for voting!
Lilibeth
November 9, 2023
What is the compatible number for the microwave handle model JVM1540DM1WW.
For model number JVM1540DM1WW
Hello LIlibeth, thank you for your inquiry. The compatible door handle for your model is part number PS10065138. Glad to be of help!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Turned out the issue was easily solved by replacing a single, inexpensive fuse.
First off, UNPLUG THE MICROWAVE.
The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the microwave and remove another screw that holds a small metal grill in place. Removing the small metal grill is probably the toughest part of this repair. You kind of have to rock it back and forth a bit to get it to release. Once that's off, you can get to the fuse. I removed the burnt out one with a pair of needle nose pliers. I also put a small piece of cardboard under the fuse when I did this so I didn't accidentally drop it into the innards of the microwave. I did the same thing when I replaced the new fuse. I then plugged the appliance back in and made sure it worked. Once that was confirmed, I replaced both grills.
Remove microwave outer cover. Turn on side & locate the upper & lower door switches. Better to replace in pairs even if one is ok. Remove the wire harness to each switch. Then replace switch and re connect the wire harness. Re attach outer cover and test to see if that solved the problem. If so then well done!!