This Drip Bowl, also known as a burner bowl or drip pan, is made to fit an element 8 inches in diameter and comes in chrome. The actual total diameter of this drip bowl is closer to 10 inches, but don't worry, it will fit your 8-inch burner. This bowl is used to catch drippings and food that falls when cooking on the oven element. The dri...Read morep bowl might burn, become rusty, and wear down over time, and will need to be replaced. Replacing the drip pan is very easy. The elements on the oven must be removed to access the pan underneath. When replacing the bowl, make sure to line up the hole with the terminal block where the element plugs into, and always remove power to your appliance and ensure it is completely cool before commencing your repair. These drip bowls are sold individually, not as a set for your appliance, so you will need to purchase each separately if upgrading all the drip bowls for your range.
This drip bowl, also known as the drip pan or burner bowl, is 6 inches in internal diameter to match the burner, but actually measures closer to 8 inches in total diameter to its outer edges. This authentic manufacturer-approved part is used to catch spills from cooking on the top burner. If your bowls are getting stained, dirty, or rust...Read moreed, this replacement can solve it. First, remove the element from the stove top, and pull out the old drip pan. Insert the new bowl and make sure it is aligned to where the element is plugged in. Lastly, you can put the element back in. For safety precautions, make sure to unplug the range from the power source and wait until the surface is cool before replacing this part. This part is sold individually, if you are replacing more than one drip bowl on your stove at once, you will need to account for this. To replace, simply pull the old surface elements and burner bowls off, give everything a thorough clean, and install the new parts with no tools necessary.
Enjoy better cooking control with this infinite switch for 8-inch stove or cooktop burners. It lets you adjust heat smoothly from low to high, so you can simmer or boil with confidence. Made for durability, it’s built to last through everyday use. If your burner isn’t heating correctly or the temperature feels off, swapping out the old sw...Read moreitch is an easy fix. Installation is simple and brings your appliance back to peak performance.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kelley - For model number JP328SK2SS
February 11, 2020
The indicator light will not go off
Hello and thank you for writing.
It certainly sounds like it could be faulty contact on the light PS3406143 you should check the part(s) for signs of damage, and replace the part(s) as needed. We hope this helps. Please contact us anytime if you require further assistance.
Large burner in the front when turning switch to low from high, it will not work
Hello Joanne, thank you for the question. We would recommend checking the infinite burner switch, part number PS12730481, to fix the issue. We hope this solves your problem!
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Omar Prieto - For model number Jp328sk2ss
November 3, 2025
What power we use in this model?
Hello Omar, thank you for reaching out. This cooktop uses a 208/240 volt, 60 Hz electrical supply. We hope this information helps!
Was this helpful?
Thank you for voting!
Rudy - For model number JP328SK2SS
May 18, 2026
Are these parts OEM parts?
Hi Rudy, thank you for the question. Yes, we sell OEM parts directly sourced from the manufacturer. Looking forward to hearing from you!
Was this helpful?
Thank you for voting!
Mary - For model number JP328SK2SS
July 13, 2026
I need an eight inch electric element coil to replace a broken one
Hi Mary, thank you for the question. The surface element you are looking for is part number PS243868. Glad to be of help!