The Grate Foot is a black rubber part which attaches underneath the grate in order to protect your stovetop from being scratched, which it does by cushioning the grate on your gas range. If this part ...
This part is a replacement lens for your oven or range. The lens is red in color, and when the elements are turned on, the light behind the lens will turn on to inform the user that the element is, in...
This part is the replacement surface burner head for your gas range. It is silver in color and is approximately 3.5 inches in diameter. This burner is sold individually. The burner head distributes ga...
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Stan
April 18, 2023
I'm not sure if the gas valve or spark igniter isn't working on my stove.The other 4 burners spark and light,the front left burner will not spark but I can light it with a match.The other problem I'm having is how to replace either one of these when I can't seem to figure out how to get to the old one to replace it.I know it should open up some were but I can't figure out how.Can you help?
For model number JGP975BEK2BB
Hi Stan, thank you for contacting us. According to our research, the issue is most probably with the spark module, part number PS952858. You may need to replace the spark module to fix the issue. We are providing you with instructions that will help you replace the spark module.
1- Remove the grate from the burner.
2- Remove the burner from the cooktop.
3- Use a putty knife to remove the old spark module.
4- Remove the wire connector and hold the wire.
5- Connect the wire with the new spark module.
We hope this helps!
Unpllug the cooktop and turn off the gas supply. Remove the grates and burners.(they just lift out). Using a torx screwdriver, remove all the torx screws below where the burners sit. There are three screws per burner, except the power burner which has only two screws. Genly lift the stainless steel cooktop, separating it from the rest of the enclosure. Hold the electrodes with one hand, while gently twisting and pulling the wire connector off. Now, remove the aluminum covered foam piece. You will now have acess to the wiring harness assembly. Disconnect the quick connectors and replace with the new assembly. Re-assemble in the reverse order and you're done. About 1.5 to 2 hours. Good Luck
A rubber grate foot on my range top had worn out. I pulled the worn foot out and installed the new grate foot with no tools or accessories. Good as new! Now I don't have to worry about the grate scraping my range top and scratching the paint. I also ordered extras so I won't have to wait if another wears out.
