JGCP548WP01 Jenn-Air Cooktop - Overview

Diagrams for JGCP548WP01

See every part. Know exactly what you need.

Parts for the JGCP548WP01

View More

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Screw – Part Number: W11233072
$30.40
In Stock
Screw
★★★★★
★★★★★
(5)
Part #W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.
Grate Feet - Kit of 4 – Part Number: W10185266
$17.95
In Stock
Grate Feet - Kit of 4
★★★★★
★★★★★
(4)
Part #W10185266
This kit contains 4 grate feet for a range. These are the feet to fit your burner grates so the burner will not scratch your cooktop. The are black in color and made of rubber. These feet are fitted with a specific fire-resistant adhesive. If necessary, be sure to order adhesive separately. Be sure your burners are off and have cooled down to the touch before replacing these parts.
Dryer Screw – Part Number: WP90767
$10.40
In Stock
Dryer Screw
Part #WP90767
This screw is sold individually.
Burner Grate – Part Number: W11344501
$230.34
In Stock
Burner Grate
★★★★★
★★★★★
(1)
Part #W11344501
NOTE: As per manufacturer this part no longer includes the grate feet and they must be ordered separately.
Surface Igniter – Part Number: W10833887
$33.96
In Stock
Surface Igniter
Part #W10833887
This surface igniter provides reliable ignition by generating the heat needed to light the burner safely and efficiently. Proper ignition improves cooking performance and safety. Replacing a worn igniter restores fast, consistent burner operation.
Range Screw – Part Number: WP74003976
$9.85
Special Order
Range Screw
Part #WP74003976
This screw is sold individually.
WOK RING – Part Number: W10216179
$47.25
In Stock
WOK RING
Part #W10216179
Palnut – Part Number: 7103P166-60
$22.24
Special Order
Palnut
Part #7103P166-60
Sold individually.
Burner Cap - Black – Part Number: WPW10256032
$83.95
In Stock
Burner Cap - Black
Part #WPW10256032
Sold individually.
Range Spark Module – Part Number: WPW10475147
$287.78
In Stock
Range Spark Module
Part #WPW10475147
This is a 4-point re-ignition spark module. NOTE: This part has been redesigned by the manufacture, it may appear different but will still function the same.
Burner Head – Part Number: W11106799
$91.64
In Stock
Burner Head
Part #W11106799
Burner Head - Right Front – Part Number: WPW10256027
$86.50
In Stock
Burner Head - Right Front
★★★★★
★★★★★
(1)
Part #WPW10256027
Are you experiencing uneven flames with your range? The Whirlpool Right Front Surface Burner Head is the solution you need. This is a genuine Whirlpool part that's been meticulously designed to make your burner perform just like new. Intended for upgrading certain Whirlpool-manufactured appliances - including select models from Maytag and KitchenAid - its job is to distribute gas evenly via its holes or slots. This ensures your burner maintains a steady, consistent flame for superior cooking. Before you get started with the installation, always make sure to turn off the gas supply and unplug the range for maximum safety. Also, wearing work gloves can provide added protection. For a seamless fit, we advise checking the compatibility with your range model before ordering. Not just a replacement part but a significant upgrade, this Burner Head breathes new life into your range, ensuring optimal performance when you need it. Upgrade now, and experience why so many trust Whirlpool for their appliance repair parts.
Read less
View More

Common Symptoms of the JGCP548WP01

How this model fails, and the parts that fix it.

Will Not Start
Fixed by
these parts
Fixing
Show All
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Burners kept clicking after ignited
32 of 36 people found this instruction helpful.
  • Robert from Ranchos de Taos, NM
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
This problem was driving me crazy for months. Of course, after I bought and installed the part and it still was not fixed I finally found a website that told me how to fix the clicking. The problem is that the removable head burners (#8 on the top assembly diagram) are not making good electrical contact with the base burners (#22). What I did was grab the head burners and grind them back and forth into the base burners with the weight on the heal of my hand. Steel wool or sandpaper would work too--you just want to clean the surfaces to restore electrical contact.
If you still want to know how to replace the spark module start by removing #24. This will allow the removal of #9 (after you take the knobs off). You may have to do some fiddling cause the rubber gasket is sticky. Next there are 2 obvious regular screws for #14 and 2 not so obvious star screws in the space where the burner valves are. After #14 is off there are 2 screws on the spark module to be removed and one that you can't loosen that is in a slot. You wriggle the module out of that one.
Read less
Was this helpful?
Thank you for voting!
the spark igniters would continue to spark after the burners were lit
6 of 8 people found this instruction helpful.
  • Robert from White Rock, NM
  • Easy
  • 15 - 30 mins
  • Screw drivers
Since the problem would only occur when the right front burner was on, I first replaced the ignitor, but the problem persisted. To replace the spark module I had to pull the range out of the nook it is in in the counter top. Then (after ensuring that the power was off) I removed the back cover. The spark module was easily located and rem oving two screws and disconnecting a few wires liberated it. The new one went in easily since it is the same part number and an exact match. Put the back on and check that the problem was solved. Done!
Read less
Was this helpful?
Thank you for voting!
One burner would continually keep sparking after burner ignited
5 of 6 people found this instruction helpful.
  • Michael from St Louis, MO
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Removed the small access cover on the bottom of the cooktop by reaching inside and under the cabinets. Removed the module which was held by two hex head screws, unplugged the wires noting the location and color of the wires. Plugged the wires into the new module in the proper locations as noted previously. Attached the module with two scr ews, and then attached the cover/access plate with two screws. Problem resolved, repair was easy.
Read less
Was this helpful?
Thank you for voting!
View More