Models > JGC8536ADQ

JGC8536ADQ Jenn-Air Cooktop - Overview

Sections of the JGC8536ADQ

[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
Burner Knob - Stainless Color – Part Number: WP7733P410-60
Burner Knob - Stainless Color
★★★★★
★★★★★
(7)
PartSelect #: PS11744702
Manufacturer #: WP7733P410-60
Sold individually. This knob accepts a D-shaped shaft. This is a plastic colored stainless knob.
$40.14
  In Stock
Burner Electrode – Part Number: WP74009336
Burner Electrode
★★★★★
★★★★★
(6)
PartSelect #: PS11744318
Manufacturer #: WP74009336
This part has a male spade and helps your burner ignite and produce flame. If a wire lead is needed, you can purchase locally.
$53.01
  In Stock
Screw – Part Number: WP400021-1
Screw
PartSelect #: PS11742240
Manufacturer #: WP400021-1
Sold individually.
$16.90
  In Stock
X-Large Burner Head with Electrode – Part Number: 74007736
X-Large Burner Head with Electrode
★★★★★
★★★★★
(2)
PartSelect #: PS2085280
Manufacturer #: 74007736
This is the burner head and electrode for your gas range. If your gas igniter glows but will not light, or if the element will not start or heat entirely, you may need to replace the burner head. This...
$103.41
  In Stock
Screw, Igniter – Part Number: WP8273062
Screw, Igniter
★★★★★
★★★★★
(1)
PartSelect #: PS11745563
Manufacturer #: WP8273062
This screw is sold individually.
$10.00
  In Stock
Large Burner Head – Part Number: 74007735
Large Burner Head
★★★★★
★★★★★
(2)
PartSelect #: PS2085279
Manufacturer #: 74007735
This part includes the spark igniter.
$109.07
  In Stock
Screw, 8/18 x 3/8 – Part Number: WP90767
Screw, 8/18 x 3/8
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$6.91
  In Stock
Burner Head with Electrode - Small – Part Number: 74007734
Burner Head with Electrode - Small
★★★★★
★★★★★
(1)
PartSelect #: PS2085278
Manufacturer #: 74007734
$83.84
  In Stock
Spark Module – Part Number: WP8286828
Spark Module
PartSelect #: PS11745759
Manufacturer #: WP8286828
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
$299.94
  In Stock
REGULATOR – Part Number: W11087445
REGULATOR
PartSelect #: PS12070643
Manufacturer #: W11087445
$240.41
  In Stock
Conversion Kit - NG - LP – Part Number: WP7509P104-60
Conversion Kit - NG - LP
PartSelect #: PS11744583
Manufacturer #: WP7509P104-60
This kit is used to convert from natural gas to liquid propane.
$27.24
  Special Order
Grommet – Part Number: WP74007705
Grommet
PartSelect #: PS11744194
Manufacturer #: WP74007705
This part is the replacement grommet for your cooktop or range. It is made of black plastic and is approximately 1 ¼ inches in diameter. This part may also be known as the cooktop burner knob gasket, ...
$11.64
  In Stock

Questions And Answers for JGC8536ADQ

Be the first to ask our experts a question about this model!

Common Symptoms of the JGC8536ADQ

[Viewing 4 of 4]
Gas igniter glows, but will not light
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Element will not heat
Fixed by
these parts
Fixing Fixing
Show All
Touchpad does not respond
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
BURNER KNOBS MELTED, Burned out electrode
R&R OLD knobs easy .R&R BURNER W/ ELECTRODE, UNSCREW LIFT OFF, UNPLUG SEECTRODE Reverse procedure easy
Parts Used:
Burner Head with Electrode - Small Burner Knob - Stainless Color
  • Michael from South Lake Tahoe, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
475 of 494 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken control knob for cooktop
found the picture of the piece I needed on your website, ordered it and have it almost immediately. very pleased with the service.
Parts Used:
Burner Knob - Stainless Color
  • Susan from Grand Junction, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
448 of 529 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
continually having to replace the knobs because they are made of cheap plastic and split down the side for whatever reason I don't know. I do not know what I am doing to cause them to split down a side. Why can't they be made of a heavier metal?
took old one off with fingers
replace with new one with a new knob again
Parts Used:
Burner Knob - Stainless Color
  • Janet from Chula Vista, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
212 of 365 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!