My Orders
- Home
- JES735WH02
- Instructions
JES735WH02 General Electric Microwave - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Turntable wouldn't turn
6 of 13 people
found this instruction helpful.
-
Christine from Edgard, LA
- Really Easy
- Less than 15 mins
Well, I can't honestly say that any repairs were done.....I just replaced the guide roller for the turntable.
The customer service was impeccable - very accurate, professional, and thorough. Shipping was more than adequate.
The customer service was impeccable - very accurate, professional, and thorough. Shipping was more than adequate.
Was this helpful?
Thank you for voting!
Roller Brush Replacement & Filter
-
GEORGE R from BREWSTER, MA
- Really Easy
- 30 - 60 mins
-
Screw drivers
Take photos before starting of parts in machine so you know how to replace new parts. Moved skid plate under machine, pulled out felt tip divider, pried up roller with screw driver,, removed belt. Done. Reverse process for new replacement part. Ordered a new belt with original order. Slipped a tool to move old belt off motor shaft.
... Read more
Placed new belt by the end of the motor shaft and then over roller. With a little extra strength push brush shaft back in to position being sure roller shaft was entering holder groves.
Read less
Was this helpful?
Thank you for voting!