JES735WD002 - Overview

Models starting with JES735WD002

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Primary Door Interlock Switch – Part Number: WB24X10047
$54.49
Special Order
Primary Door Interlock Switch
★★★★★
★★★★★
(3)
Part #WB24X10047
This interlock switch is located in the door latch.
Spring – Part Number: 4970WRA001G
$13.15
In Stock
Spring
★★★★★
★★★★★
(1)
Part #4970WRA001G
This spring provides tension or controlled movement within the appliance mechanism. Engineered for durability, it supports smooth operation and helps maintain proper alignment of connected components.
Micro Switch – Part Number: 6600W1K001D
$24.15
In Stock
MOTOR, AC SYNCHRONOUS – Part Number: 6549W1S011E
$45.59
Special Order
MOTOR, AC SYNCHRONOUS
Part #6549W1S011E
Microwave Lever – Part Number: 4510W3L003A
$16.45
In Stock
Microwave Lever
Part #4510W3L003A
Light Bulb - 125V 20W – Part Number: WB36X10063
$24.75
Special Order
Light Bulb - 125V 20W
Part #WB36X10063
This part is the replacement light bulb for your microwave. This bulb is 125 volts and 25 watts. It should come on automatically when you open your microwave door, or if the microwave is running. If your light bulb is burnt out, it will not be able to do this, and will need to be replaced. Before you change the bulb, be sure to check that the light socket still works, as it may need to be replaced as well. Remember to disconnect the microwave from the power source before you begin this repair. This part is sold individually and is an OEM part sourced directly from the manufacturer.
High Voltage Diode – Part Number: 6021W3B001V
$21.95
On Order
High Voltage Diode
Part #6021W3B001V
FUSE – Part Number: WB27X1089
No Longer Available
FUSE
Part #WB27X1089
Wave Guide Resin Cover – Part Number: WB06X10764
$17.95
Special Order
Wave Guide Resin Cover
Part #WB06X10764
FAN – Part Number: 5900W1A004C
$13.15
Special Order
FAN
Part #5900W1A004C
Screw,Customized – Part Number: 4B70188C
$13.15
Special Order
Screw,Customized
Part #4B70188C
Lamp,Incandescent – Part Number: 6912W3B002L
$27.95
In Stock
Lamp,Incandescent
Part #6912W3B002L

Common Symptoms of models starting with JES735WD002

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave would turn on and count down, but not heating and not rotate turntable. Pressing door up would occasionally start heat.
40 of 67 people found this instruction helpful.
  • Michael from Ridgefield, CT
  • Really Easy
  • Less than 15 mins
  • Screw drivers
First I disconnected the power and opened the door. Then I removed the top screws holding the top vent louvers, then removed the screw at the top of the touch pad. The touch pad removes by sliding up slightly then tilting top out. I unscrewed two screws holding the door latch assembly. Press the tab to remove and replace switch. Reco nnect wires, reseat latch mount by placing top bracket tab in place first, allign and secure with screws. Reseat touch pad by placing bottom tabs in first, tilt forward and press up to seat top tabs, secure with top screw. Secure vent louver screws, plug in and watch your microwave work again.
Was this helpful?
Thank you for voting!
Microwave runs with the door open
37 of 58 people found this instruction helpful.
  • Thomas from Andover, NJ
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Remove microwave outer cover. Turn on side & locate the upper & lower door switches. Better to replace in pairs even if one is ok. Remove the wire harness to each switch. Then replace switch and re connect the wire harness. Re attach outer cover
and test to see if that solved the problem. If so then well done!!
Was this helpful?
Thank you for voting!
bulb out
29 of 39 people found this instruction helpful.
  • Oran from Chesapeake, VA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
The most difficult thing was removing the star security screws Both Home Depot and Lowes have tools to do this. The repair was a piece of cake, may have taken 15 min. Unplug 120v, remove case, bulb, replace and reassemble. GE doesn't want consumers fooling around inside the case, so be careful.
Was this helpful?
Thank you for voting!