Models > JES2051SN5SS > Instructions

JES2051SN5SS General Electric Microwave - Instructions

All Instructions for the JES2051SN5SS
1 - 7 of 7
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The glass plate in the microwave wouldn't rotate.
So simple!! I took the glass plate out of the microwave and removed the plastic part that it was sitting on and installed the new part. I put the glass plate back in and turned the microwave on and the glass plate started to rotate just like it was supposed to. The wheels on the old part had become flat and that's why it wouldn't rotate. No tools were needed.
Parts Used:
Rotating Ring Assembly
  • Gretchen from RANDOLPH, MN
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
12 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken wheel
Swapped new part with broken part.
Parts Used:
Rotating Ring Assembly
  • Richard from LAFAYETTE HL, PA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
metal ring lost the rubber inserts that sit in the 6 holes so tray would not stay on the ring
FarBoat 12pcs Silicone Plugs Waterproof Tapered Round Hole Stoppers Black for 6mm Hole
Parts Used:
Rotating Ring Assembly
  • Al from SILVER SPRING, MD
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
original rotating ring assembly was broken
Removed broken assembly and set the new assembly in place
Parts Used:
Rotating Ring Assembly
  • Rodney from Santa Barbara, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I accidentally dropped the tray to the floor glass pieces got everywhere so it broke. Thats why I ordered a new plate.
Just to replace it as it was just a plate.
Parts Used:
Glass Cooking Tray
  • James from Jacksonville, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Rotating ring finally wore out!
I just dropped the part and we were good to go! When mamas happy I'm happy!!!!!!
Parts Used:
Rotating Ring Assembly
  • Scott from Fredericksburg, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Wheel borke off old Rotating Ring
Removed glass try, easly pulled ring up and off shaft and installed in reverse order aligning keyway on new part with keyway shaft, then placed glass tray back into unit. As simple as turning a door knob.
Parts Used:
Rotating Ring Assembly
  • Tim from Beloit, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the JES2051SN5SS
1 - 7 of 7