This ceramic microwave fuse is just over an inch in length. It is white in the center, and metal on both ends. This is a 20-amp fuse, and is used to power your microwave. If the touch pad on the micro...
This is the rotating ring assembly for your microwave. It rests under the glass tray, and allows it to rotate so your food can cook evenly. If you notice that your food is not cooking evenly or if the...
This part is the replacement high-voltage diode for your microwave. It is approximately 3 inches long and is sold individually. The high voltage diode is an electrical current control device inside yo...
This part is the replacement light bulb for your microwave. This bulb is 125 volts and 25 watts. It should come on automatically when you open your microwave door, or if the microwave is running. If y...
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Philip
January 25, 2020
What is the wattage on this microwave?
For model number JES2051SN3SS
Hello Philip,
Thank you for your question. The wattage for this GE microwave is 1200W. We hope this helps
10 people found this helpful.
Was this helpful?
Thank you for voting!
Morris
March 20, 2020
How do you change out the light bulb?
For model number JES2051SN3SS
Hi Morris, Thank you for the question. Here is a link to a how to video that may help. Good luck with the repair.
https://www.youtube.com/watch?v=8nyWSG08-t0&feature=emb_title
1 person found this helpful.
Was this helpful?
Thank you for voting!
Amy
May 5, 2023
What size is the microwave plate
For model number JES2051SN3SS
Hi Amy, thank you for reaching out. The diameter of the glass turntable plate, part number PS2321884, is 16 inches. We hope this information is useful!
Hello Margaret, thank you for getting in touch. The microwave glass tray you are looking for is part number PS2321884. If you require assistance to place an order, please contact customer service!
My microwave was bought in 2018, yesterday it stopped heating.
For model number JES2051SN3SS
Hi Lenora, thank you for reaching out. We have concluded that the issue is with the high voltage diode. The diode converts the A/C power output of the transformer to D/C, doubling the voltage to nearly 5,000 volts. This high voltage powers the magnetron to heat the food. If the diode burns out, the magnetron will not receive enough voltage to operate, preventing the microwave from heating. We recommend you replace the diode, part number PS16219547, to fix the issue. Let us know if you have further questions!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Turned out the issue was easily solved by replacing a single, inexpensive fuse.
First off, UNPLUG THE MICROWAVE.
The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the microwave and remove another screw that holds a small metal grill in place. Removing the small metal grill is probably the toughest part of this repair. You kind of have to rock it back and forth a bit to get it to release. Once that's off, you can get to the fuse. I removed the burnt out one with a pair of needle nose pliers. I also put a small piece of cardboard under the fuse when I did this so I didn't accidentally drop it into the innards of the microwave. I did the same thing when I replaced the new fuse. I then plugged the appliance back in and made sure it worked. Once that was confirmed, I replaced both grills.
Remove microwave outer cover. Turn on side & locate the upper & lower door switches. Better to replace in pairs even if one is ok. Remove the wire harness to each switch. Then replace switch and re connect the wire harness. Re attach outer cover and test to see if that solved the problem. If so then well done!!