This grease filter is almost fourteen inches long and almost twelve inches wide. This filter is intended for use with some downdraft cooktops and ranges.
This is the replacement surface burner switch for your range. It measures approximately 1.5 inches by 1.5 inches, with a shaft that is approximately 1 inch long. The surface burner switch turns the su...
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
This exhaust vent blower wheel is almost seven inches in diameter, and just under four inches deep. It is made entirely of metal and is used with a range's venting system.
This may look different than the original, but is a functional equivalent. When installing this part, you may be required to drill holes and file the metal edges to adapt the switch to the original panel.
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Nicole
July 18, 2023
One but her does not heat
For model number JED8345ADB
Hi Nicole, thank you for the question. If your burner the element does not get hot, we recommend replacing the surface burner switch, part number PS12070671. You also should make sure your element has good continuity. We hope this solves your problem!
Hello Nicole, thank you for the question. According to our research, you may need to remove the hex screws securing the cooktop. After removing the screws, pull the cooktop up and you will have the access to burner switch. Remove the screws securing the switch. Disconnect the electric connection and replace it with the new one. We hope this helps!
Was this helpful?
Thank you for voting!
Nicole
July 19, 2023
Only one burner does not work on the cartridge
For model number JED8345ADB
Hi Nicole, thank you for contacting us. We have concluded that the issue is with the surface burner switch, part number PS12070671, as it is most likely faulty and may need to be replaced. We hope this solves your problem!
I had put up with a filter that got more and more raggedy every year, but I thought my 30 yr. old range/grill top was too old for me to find an replacement filter. What a great service you offer. I found you by web-surfing, typed in the model #, and presto--you sent me the shiny new filter. All I had to do was pop it in and throw away the nasty grill (after washing the scent off to keep the bears out of my Colorado garbage.) Thank you!