Models > JE2160S

JE2160S General Electric Microwave - Overview

Sections of the JE2160S

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Roller Guide – Part Number: WB02X10895
Roller Guide
★★★★★
★★★★★
(1)
PartSelect #: PS951887
Manufacturer #: WB02X10895
The roller glide in your microwave rests under the microwave plate, and allows it to rotate when the microwave is running. It is a round plastic ring with 3 wheels spaced out around the perimeter. If ...   No Longer Available
Cooking Tray – Part Number: WB49X10108
Cooking Tray
PartSelect #: PS956195
Manufacturer #: WB49X10108
This tray rotates in your microwave ensuring more even temperatures
$137.92
  Special Order
SWITCH MON. – Part Number: WB24X824
SWITCH MON.
PartSelect #: PS237416
Manufacturer #: WB24X824
$21.64
  Special Order
Micro Switch – Part Number: WB24X10103
Micro Switch
★★★★★
★★★★★
(1)
PartSelect #: PS651389
Manufacturer #: WB24X10103
$19.90
  Special Order
Light Bulb and Socket – Part Number: WB36X951
Light Bulb and Socket
PartSelect #: PS247776
Manufacturer #: WB36X951
This light bulb is sold with the socket. The bulb is 120V and 25W.
$22.27
  Special Order
Primary/Secondary Switch – Part Number: WB24X823
Primary/Secondary Switch
PartSelect #: PS237415
Manufacturer #: WB24X823
This is sold individually. Your appliance would need 2 of these.
$8.92
  Special Order
DIODE HV AS – Part Number: WB27X10687
DIODE HV AS
PartSelect #: PS953843
Manufacturer #: WB27X10687
$32.54
  Special Order
Turntable Motor – Part Number: WB26X186
Turntable Motor
PartSelect #: PS237917
Manufacturer #: WB26X186
$63.14
  Special Order
Control Panel with Touchpad - Stainless – Part Number: WB27X10691
Control Panel with Touchpad - Stainless
PartSelect #: PS783555
Manufacturer #: WB27X10691
$102.77
  Special Order
HOLDER THERMOSTAT – Part Number: WB02X10807
HOLDER THERMOSTAT
PartSelect #: PS224056
Manufacturer #: WB02X10807
$8.05
  Special Order
Electronic Control Board – Part Number: WB27X10688
Electronic Control Board
PartSelect #: PS783554
Manufacturer #: WB27X10688
$348.88
  Special Order
Magnetron – Part Number: WB27X10682
Magnetron
PartSelect #: PS953838
Manufacturer #: WB27X10682
This part is used to generate microwave energy/heat.
$217.70
  Special Order

Questions And Answers for JE2160S

Be the first to ask our experts a question about this model!

Common Symptoms of the JE2160S

[Viewing 3 of 3]
Tray won’t turn
Fixed by
these parts
Show All
Won’t turn on
Fixed by
these parts
Show All
No heat
Fixed by
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Original lamp burned out.
After looking up on the computer a schematic of the unit, all that was needed was removing four screws to remove the top and side cover which was one piece.
Next was removal of electrical connection to burned out lamp, then removing burned out lamp and installing the new lamp and reconnecting electrical connection.
Job was complete after reinstalling the cover.

Microwave now working with new lamp lighting when in use.
Parts Used:
Light Bulb and Socket
  • Rudy from Huntington, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
72 of 87 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Both Intermittent- and No-Heating
First, I read the PartsSelect DIY report by Linda, Warsaw, IN. With confidence, I purchased the magnetron. Upon receipt, I took the built-in microwave out of the cabinet, set the unit on the kitchen floor, and was stopped cold by the Safety Torx nuts on the reverse of the unit. Borrowing the right wrench allowed the 20 minute start-to-finish part changeout and reinstallation of the unit in the cabinet to proceed. The old magnetron was the defective part. Discovery of the 10-year Parts-Only warranty on the less than 10-year old unit was insufficinet to guide me to take the unit in for their Labor bill to repair. New part in hand, it just was that easy - and assumed to be no less expensive.
Parts Used:
Magnetron
  • Richard from Merritt Island, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
15 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The turntable would not turn, and made a clicking sound
Thanks to great instructions from a previous person, this was super easy. It took 5 minutes to remove and replace the new motor. The big part of this job was cleaning out the cabinet where the microwave sits, since I had to take it out.

There is a 'door cover' pressed into the bottom of the microwave, that just has 6 small tabs that you need to cut. Then remove 1 screw, and the wire clip and the motor is changed. The door just reverses and re-installs with 1 screw. When the microwave was designed, this repair was in the engineers mind. So simple I couldn't beleive it.
Parts Used:
Turntable Motor
  • Dave from Danville, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
10 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!