1. Removed brackets holding the cooktop in place. 2. Removed the cooktop. 3. Removed the screws holding the housing for the elements. 4. Removed bad element. 5 Connected new element. 6. Reassemble
Pulled unit from the counter top, removed all side screws holding the top on and set the top off. Removed switch mount section, Identified the terminal wire locations. I then removed the old switch and connected the wires per my diagram. Returned all screws, tested the burner for opeation and reset the cooktop back into the counter hole and secured.
pulled off old knobs and replaced with new knobs. Only one was broken, but wanted all of them to match so ordered enough for entire range. Worked perfectly. Looks great!