JBP24BB4WH General Electric Range - Overview

Diagrams for JBP24BB4WH

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Surface Burner Switch - 8 Inch - 2500W – Part Number: WB24T10025
$74.43
Special Order
Surface Burner Switch - 8 Inch - 2500W
★★★★★
★★★★★
(17)
Part #WB24T10025
The 8-inch surface element switch is also known as an infinite heat switch, and is a part for your range. It controls the large surface element. It will turn the element on and off, and allow you to change the heat intensity. The knob to adjust the heat setting mounts on the shaft of this swtich. The burner knob is sold separately. If your large surface element will not turn on, or you cannot adjust the heat intensity, you may have a broken or damaged surface burner switch. Be sure you disconnect your range from the power source before you begin this repair.
Drip Bowl - 8 Inch – Part Number: WB31T10011
$44.40
Special Order
Drip Bowl - 8 Inch
★★★★★
★★★★★
(8)
Part #WB31T10011
This Drip Bowl, also known as a burner bowl or drip pan, is made to fit an element 8 inches in diameter and comes in chrome. The actual total diameter of this drip bowl is closer to 10 inches, but don't worry, it will fit your 8-inch burner. This bowl is used to catch drippings and food that falls when cooking on the oven element. The drip bowl might burn, become rusty, and wear down over time, and will need to be replaced. Replacing the drip pan is very easy. The elements on the oven must be removed to access the pan underneath. When replacing the bowl, make sure to line up the hole with the terminal block where the element plugs into, and always remove power to your appliance and ensure it is completely cool before commencing your repair. These drip bowls are sold individually, not as a set for your appliance, so you will need to purchase each separately if upgrading all the drip bowls for your range.
Light Bulb - 40W – Part Number: 40A15
$19.10
Special Order
Light Bulb - 40W
★★★★★
★★★★★
(3)
Part #40A15
This 40-Watt light bulb is sold individually. It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges, microwaves, and dryers. It features a frosted glass bulb with a standard metal socket base, which allows you to easily unscrew the burnt-out light and twist the new bulb into place.
Drip Bowl - 6 Inch – Part Number: WB31T10010
$42.54
Special Order
Drip Bowl - 6 Inch
Part #WB31T10010
This drip bowl, also known as the drip pan or burner bowl, is 6 inches in internal diameter to match the burner, but actually measures closer to 8 inches in total diameter to its outer edges. This authentic manufacturer-approved part is used to catch spills from cooking on the top burner. If your bowls are getting stained, dirty, or rusted, this replacement can solve it. First, remove the element from the stove top, and pull out the old drip pan. Insert the new bowl and make sure it is aligned to where the element is plugged in. Lastly, you can put the element back in. For safety precautions, make sure to unplug the range from the power source and wait until the surface is cool before replacing this part. This part is sold individually, if you are replacing more than one drip bowl on your stove at once, you will need to account for this. To replace, simply pull the old surface elements and burner bowls off, give everything a thorough clean, and install the new parts with no tools necessary.
Bake Element - Push On Terminals - 240V – Part Number: WB44T10010
No Longer Available
Bake Element - Push On Terminals - 240V
★★★★★
★★★★★
(9)
Part #WB44T10010
This bake element is found on the bottom of the oven.
Temperature Sensor Kit – Part Number: WB23X5340
$124.11
Special Order
Temperature Sensor Kit
★★★★★
★★★★★
(25)
Part #WB23X5340
This kit includes the sensor as well as the connectors. NOTE This sensor is 2" long.
Range Surface Element Control Switch - 6 Inch - 1560 W – Part Number: WB24T10029
$69.15
Special Order
Range Surface Element Control Switch - 6 Inch - 1560 W
★★★★★
★★★★★
(10)
Part #WB24T10029
If your stove’s burner isn’t heating right—maybe it’s stuck on high or won’t turn on at all—this control switch could be the fix. It’s made for 6-inch burners and lets you adjust the heat smoothly, not just in set steps. It works by turning the burner on and off to reach the temperature you want. Swapping out a worn switch can help your stove cook more evenly and safely.
Foot - Leveller – Part Number: WB02X10521
$29.72
Special Order
Foot - Leveller
Part #WB02X10521
Sold individually.
Surface Burner Terminal Block Kit – Part Number: WB17T10006
$87.90
Special Order
Surface Burner Terminal Block Kit
★★★★★
★★★★★
(1)
Part #WB17T10006
This kit includes the female contact with wires, terminal block and mounting clip.
Broil Element – Part Number: WB44T10009
$101.63
Special Order
Broil Element
★★★★★
★★★★★
(1)
Part #WB44T10009
This broil element is found on the upper part of the oven cavity.
Oven Rack – Part Number: WB48T10011
$114.66
Special Order
Oven Rack
★★★★★
★★★★★
(2)
Part #WB48T10011
Sold individually.
RECEPTACLE PUSH-IN – Part Number: WB08T10026
$15.95
Special Order
RECEPTACLE PUSH-IN
★★★★★
★★★★★
(6)
Part #WB08T10026
This part is the replacement light socket for your oven. The oven light socket provides power to the light, and at the same time holds the light bulb in place.

Questions And Answers for JBP24BB4WH

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kris - For model number JBP24BB4WH
December 15, 2019
The clock beeps on and off on its own. Sometimes going blank all together. Is the control board had or could it be something else? Can it be silenced or disconnected and still be able to use oven?
Chris Boyle Profile
Hi Kris, you can turn off the display, Touch the Clock pad once to turn off the time of day display. If this does not work it does sound like you need to replace the control board. Thank you for your question and good luck with your repair!
No Longer Available
Electronic Clock Control
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the JBP24BB4WH

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Burner bowls needed replacement
488 of 507 people found this instruction helpful.
  • Tom from North Prairie, WI
  • Really Easy
  • Less than 15 mins
Very easy repair, Pulled burner coil out, removed old burner bowl. Put in new burner bowl, plugged burner coil back in... easy as 1,2,3
Was this helpful?
Thank you for voting!
Burner Bowl Needed Replaced
524 of 693 people found this instruction helpful.
  • Stephen from Knoxville, TN
  • Really Easy
  • Less than 15 mins
Removed burner element and put in bowl
Was this helpful?
Thank you for voting!
Bake Element burned out, bunt like a sparkler.
353 of 377 people found this instruction helpful.
  • Brad from Bedford, KY
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Ordered the part on Friday, got it on Saturday, very impressive. Be sure to unplug the range or disconnect the power at the breaker box before any repairs are started.

The lower (Bake) element is held in by 2 screws. Remove them and gently pull out the element to remove the power wires connected to the element. These wires are very short and there is not much room in which to work. After having removed the wire connectors one slipped from my fingers and went back in the small opening in the back of the oven where the element is inserted. It took some time to fish out the wire. Not wanting to slide out the range I used some surgical forcepts I happen to have grab the wire ( handy to clip wires or compontents in place for some delicate repairs). Its all blind and the opening is very small plus the insulation must be pushed back to gain access. Anyway I managed to grab the wire, attached both wires to the element, replaced the plate and screws holding the element in place, all finished. Worked great. Other ranges I have owned provided a socket to plug in the element, I guess the bottom line gets in the way of quality.. Being 60 years old the worst part of this job is the getting down on my knees to do the work and getting back up again.
Was this helpful?
Thank you for voting!