JBL2286KES12 Jenn-Air Refrigerator - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Refrigerator Center Crisper Drawer Slide Rail - White – Part Number: WPW10671238
$80.02
In Stock
Refrigerator Center Crisper Drawer Slide Rail - White
★★★★★
★★★★★
(357)
Part #WPW10671238
This center crisper drawer rail supports the edges of refrigerator crisper drawers, ensuring smooth sliding and proper alignment. At 13.5 inches long, it fits between the drawers on the shelf frame. Quick and easy to install, this replacement restores stability and functionality to the crisper drawer system.
Crisper Drawer Cover Support – Part Number: WP67001716
$16.49
In Stock
Crisper Drawer Cover Support
★★★★★
★★★★★
(79)
Part #WP67001716
This crisper drawer cover support is for refrigerators. Crisper drawer cover support supports the crisper drawer lid. Wear work gloves to protect your hands when installing this part.
Refrigerator Water Filter – Part Number: EDR4RXD1
$133.17
In Stock
Refrigerator Water Filter
★★★★★
★★★★★
(3)
Part #EDR4RXD1
This water filter purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it is causing reduced water flow or just replaced periodically per the owner manual. Replacing this water filter may fix a noisy or leaking fridge, a fridge that is not dispensing water (or reduced flow rate), and an ice maker that is not making ice at all, or not making enough ice. This filter is white, sold individually and measures 8 inches by 3 inches in diameter. This water filter has been updated by the manufacturer. It may appear different but will still function the same. It is sold individually.
Refrigerator Crisper Frame – Part Number: WPW10568041
$151.31
In Stock
Refrigerator Crisper Frame
★★★★★
★★★★★
(51)
Part #WPW10568041
This shelf frame is an essential component for maintaining the organization and functionality of your refrigerator’s crisper or pantry area. It serves as the sturdy base for the glass shelf above the drawer, helping to keep produce and other items neatly stored. Designed to fit a variety of refrigerator models, the frame is built for long-lasting use. Please be aware that this item includes only the frame; the glass insert and center support are sold separately. Installation is simple and typically requires no tools—just slide the frame into place to restore your fridge’s storage setup.
Replacement Ice Maker – Part Number: D7824706Q
$147.86
In Stock
Replacement Ice Maker
★★★★★
★★★★★
(71)
Part #D7824706Q
This modular ice maker assembly replaces worn-out units to restore ice production in refrigerators. It includes the ice mold and control device but excludes the cover, ice level arm, wire harness, and mounting hardware, which must be reused or ordered separately. Unplug the refrigerator before installation and use work gloves for safety. Check compatibility with your model number before purchase.
Refrigerator Capacitor – Part Number: WPW10662129
$58.29
In Stock
Refrigerator Capacitor
★★★★★
★★★★★
(36)
Part #WPW10662129
This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.
Touch-Up Paint - White – Part Number: 72017
No Longer Available
Touch-Up Paint - White
★★★★★
★★★★★
(23)
Part #72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.
Refrigerator Door Switch – Part Number: W11384469
$43.83
In Stock
Refrigerator Door Switch
★★★★★
★★★★★
(36)
Part #W11384469
Door switch turns the light off when you close the door.
Refrigerator Water Filter Bypass – Part Number: W11395888
$56.05
In Stock
Refrigerator Water Filter Bypass
★★★★★
★★★★★
(12)
Part #W11395888
This water filter bypass cap is a genuine OEM component designed for select Whirlpool, Maytag, KitchenAid, and affiliated refrigerator models. Installed in place of the water filter, it allows uninterrupted water flow to the dispenser and ice maker when the filter is removed or non-functional. The cap fits securely into the water filter head, providing a temporary or permanent bypass solution without filtering the water. It is commonly used during troubleshooting or when a replacement filter is unavailable. The kit includes the bypass cap and may feature installation instructions for quick and secure setup. Note: This part does not purify water and should not be used as a substitute for a functioning filter in systems requiring filtration.
Refrigerator Dual Water Inlet Valve – Part Number: WP67006531
$219.31
In Stock
Refrigerator Dual Water Inlet Valve
★★★★★
★★★★★
(20)
Part #WP67006531
The water inlet valve is a solenoid-operated switch that, when activated, releases water from the supply line to the water valve and into the compact icemaker mold and to the water line.
Icemaker Control Assembly – Part Number: W10190935
$96.02
In Stock
Icemaker Control Assembly
★★★★★
★★★★★
(20)
Part #W10190935
This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. Motor is not sold separately.
Refrigerator Crisper Pan – Part Number: WP67002633
$177.84
In Stock
Refrigerator Crisper Pan
★★★★★
★★★★★
(9)
Part #WP67002633
Sold individually. Crisper drawer is an original equipment manufacturer (OEM) part that fits some bottom-freezer Kenmore, Amana, Crosley, Jenn-Air, KitchenAid, Maytag and Whirlpool refrigerators. The crisper drawer is approximately 6-7/8-inches tall, 14-inches wide and 15-inches deep.

Common Symptoms of the JBL2286KES12

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
light on to order water filter
916 of 1059 people found this instruction helpful.
  • Douglas from Byron, NY
  • Really Easy
  • Less than 15 mins
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
Was this helpful?
Thank you for voting!
Icemaker producing few or no cubes and often leaving "kling-ons" on ice tray
816 of 915 people found this instruction helpful.
  • Bernie from Diamond Bar, CA
  • Easy
  • 30 - 60 mins
  • Nutdriver
Interior surface of ice tray felt rough & flaky (coating deteriorated) so cubes would not release.
Unplug appliance.
Remove timer cover by hand pressure @ edge.
Remove single attachment screw & bracket at lower front of icemaker.
Disconnect wiring harness from socket @ rear of compartment.
Tricky part was determin ing what type of connection held the other two attachment points along the long edge of the icemaker. I did not have repair manual or useful drawing but looked @ PartsDirect pic of side brackets & used a small mirror to confirm that mine were also some sort of "snap in" attachment.
Remove icemaker unit by pushing upward and outward on the unit. I takes a good bit of pressure and will pop loose, but be careful not to break attachment bracket from freezer wall.
Scavenge shut off bar and wiring harness from old icemaker once you have it out & attach to new one before installing it back in freezer.
Again, you might find a mirror useful to align those pesky snap-in brackets with the new unit.
Since you probably kept your freezer running while waiting for the part, the plastic snap-ins will be cold and brittle. I warmed them up first by applying a dampened cloth heated in the microwave to make them a little more pliable.
A good push of the new unit towards the snap-ins along with some upward force will get it stable.
Reattach the metal screw in bracket & connect the wiring harness to rear plug... and don't forget to plug the whole thing back in.
It will take awhile for the first batch of cubes dump as the timer may need to cycle completely around to get to the fill cycle... be patient.
Dump the first couple of batches of cubes just to make sure you're free of any residue.
Was this helpful?
Thank you for voting!
No ice
567 of 688 people found this instruction helpful.
  • Daniel from Suwanee, GA
  • Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
removed flap door in front of icemaker...removed 3 screws with bolt heads...removed one additional screw with bolt head and ice unit slid out. I removed motor unit (pops out no screws). Replaced and had ice within 3 hours.
Was this helpful?
Thank you for voting!