J310*01 General Electric Range - Overview

Diagrams for J310*01

See every part. Know exactly what you need.

Parts for the J310*01

$42.95

Bake Element

Part #WB44X5099

This closed hinged-style bake element has screw in terminals.

Range Infinite Heat Switch Kit

Part #WB21X36771

The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.

$125.06

Tilt Lock Hinge Mounted Surface Burner Kit - 6"

Part #WB30X342

This 6-inch surface element provides heat for boiling, frying, and simmering on an electric range. Its 3-wire, tilt-lock design runs on 240 volts and produces about 1,325 watts. Replace it if it does not heat, heats unevenly, or has burned or broken areas. Before ordering, inspect the control switch, wire ends, and mounting parts. Confirm...Read more

Read less

$123.56

8 Inch Surface Burner

Part #WB30X348

This surface element kit includes an 8 inch element, two wire, 2350 watt surface element, and a terminal block with all three-wire units. These high rise elements do not come with an attached trim ring.

$48.59

Broil Element Kit

Part #WB44X134

This element has screw on terminals.

$447.71

Timer Kit

Part #WB19X10008

This kit replaces some mechanical clocks. ***Please NOTE: The wiring of this part may be difficult and it is best to have it installed by appliance repair person.

Common Symptoms of the J310*01

How this model fails, and the parts that fix it.

Element will not heat

Fixed by
these parts

Show All

Little to no heat when baking

Fixed by
these parts

Show All

Little to no heat when broiling

Fixed by
these parts

Show All

Oven not heating evenly

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

The lower bake element burned out.

67 of 72 people found this instruction helpful.

Carlos from Southaven, MS
Really Easy
Less than 15 mins
Nutdriver

First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, reconnected the wires to the new element, reattached it to the oven and voila!

It worked. What was really cool, once I ordered the part, I received it in only two work days!

Goo ... Read more

Read less

Was this helpful?

Large burner would operate on high setting only.

22 of 28 people found this instruction helpful.

Ernest from Bellevue, NE
Really Easy
15 - 30 mins
Pliers, Socket set

1. Removed the back panel.
2. Disconnected the wires from the old switch while connecting wires to the new switch one at a time.
3. Installed the new switch and broke off the excess metal on the post which fits into the burner knob on front of the range.
4. Replaced the burner knob and replaced the back panel.

Was this helpful?

Replaced lower element in GE Spectra range.

22 of 31 people found this instruction helpful.

Phillip from Greeneville, TN
Really Easy
Less than 15 mins
Nutdriver

Hardest part was getting the wrong element and having to send it back and reordering correct one....too many variables. Two screws inside the oven removed, pull out range and take off back and attach new element to plug ins!

Was this helpful?