IRL6520 (Type 0) DeVilbiss Compressor - Overview

Diagrams for IRL6520

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Switch Pres 2Port 10 – Part Number: 5140112-18
$154.47
Special Order
Switch Pres 2Port 10
Part #5140112-18
Washer – Part Number: 330016-21
$7.44
Special Order
Washer
Part #330016-21
This is an OEM part sourced directly from the manufacturer. The washer is generally found in compressors from Porter Cable, DeVilbiss, and Black & Decker. This part is made of metal, and is used to provide space and protection between the motor and a lock nut. Please be aware that there are different washers used in the machine. Refer to the parts diagram to be sure of ordering the correct part. This item is sold individually.
Gasket – Part Number: 5140118-80
$13.35
Special Order
Gasket
Part #5140118-80
It is a genuine manufacturer sourced replacement part that is specially designed for Craftsman air compressors. This gasket provides an air-tight seal for the cylinder head assembly. Over time gaskets tend to get compressed, become brittle and crack eventually requiring replacement to maintain peak performance. It is made from durable, high quality composite material and it is sold individually.
RING PANEL MOUNTING – Part Number: CAC-61
No Longer Available
RING PANEL MOUNTING
Part #CAC-61
Assembly Valve Plate – Part Number: Z-CAC-4212-1
No Longer Available
Assembly Valve Plate
Part #Z-CAC-4212-1
Tube Pres Rel .250OD – Part Number: AC-0028
No Longer Available
Tube Pres Rel .250OD
Part #AC-0028
Key Motor Shaft – Part Number: 15294
$7.44
Special Order
Key Motor Shaft
Part #15294
VALVE SAFETY 150 .12 – Part Number: 97503734
$16.13
Special Order
VALVE SAFETY 150 .12
Part #97503734
This safety valve is a genuine replacement part manufactured for use with air compressors. If the compressor's pressure switch malfunctions and does not turn the motor off when the amount of pressure is met, the safety valve will open to release the extra air pressure. The amount of pressure required to open the safety valve is set by the tension of the spring inside the valve. The spring can wear out, and leave the valve open at a lower pressure than what is set to turn the switch off, and will not allow pressure to build inside the tank. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality part is made of durable metal and is sold individually.
STANDPIPE BRASS MALE – Part Number: AC-0027-2
No Longer Available
STANDPIPE BRASS MALE
Part #AC-0027-2
ADAPTER .25 NPT X .2 – Part Number: D26889
No Longer Available
ADAPTER .25 NPT X .2
Part #D26889
This is an OEM part sourced directly from the manufacturer. The adapter is designed for use in compressors from DeVilbiss, Black & Decker, Delta, and Porter Cable. This part is made of metal, and may be used to connect the regulator to the tank. You will require a wrench when replacing this part. This item is sold individually.
ASSY CORD MOTOR SJT – Part Number: CAC-4215-1
$14.65
Special Order
ASSY CORD MOTOR SJT
Part #CAC-4215-1
ASSY NUT SLEEVE 1/4 – Part Number: SSP-7811
$7.44
Special Order
ASSY NUT SLEEVE 1/4
Part #SSP-7811
It is an OEM component which is designed for use with air compressors. This special nut sleeve assembly secures the pressure relief tube to the pressure switch. It is a high-quality replacement for a damaged or a missing hardware that was installed on a new unit. One durable metal nut sleeve assembly is included. A wrench will be needed to perform this repair. Check the appropriate diagrams for your model to ensure the proper replacement procedure. Make sure to drain the air before starting this repair.

Common Symptoms of the IRL6520

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oil weeping out of bottom of air pump
2 of 2 people found this instruction helpful.
  • Joseph from MAYER, AZ
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Socket set, Wrench (Adjustable)
1. Removed air pump from compressor
2. Removed oil
3. Removed 8 bolts holding bottom of air pump
4. Replaced bottom with the new gasket
5. Replace the 8 bolts
6. Refill 16 oz oil
7. Reinstall air pump to compressor
Was this helpful?
Thank you for voting!
35+ Yr old Craftsman Air Compressor stopped working
2 of 4 people found this instruction helpful.
  • Mary from CYPRESS, TX
  • Really Easy
  • Less than 15 mins
  • Pliers, Wrench (Adjustable)
Perseverance-after having a hard time removing drain cock , oil drain and oil fill I could not exactly see where air filter was located, Found Air filter
Pulled it out with needle nose pliers and could not find one locally. Luckily I found this site ordered filter and they shipped right away. Got my filter and the old Air Compressor is alive again . Thank you so very much. You have a customer for life.
Thanks, Mary
Was this helpful?
Thank you for voting!