IRFB412 (Type 1) DeVilbiss Compressor - Overview

Diagrams for IRFB412

See every part. Know exactly what you need.

Page A

Parts for the IRFB412

Strip Rubber Foot

Part #SUDL-6-1

Valve Check-3/4NPT X

Part #A19717

Nut .375-16 UNC-2B H

Part #SSF-8080-ZN

Nipple .25NPT X 2.5

Part #D24888

Gauge Left Hand

Part #Z-AC-0010-1

Eccentric Bearing Assembly

Part #Z-AC-0140

This kit includes genuine OEM replacement parts and is compatible with various Porter Cable, DeVilbiss, and Black & Decker compressors. It includes eccentric bearing and screw. The bearing is sealed on both sides. The screw has a slotted hex-head.

Kit Capacitor

Part #D30144

Gauge Right Hand

Part #AC-0009-1

Head 3/8 Outlet Front

Part #AC-0037

Shroud Mini

Part #AC-0376

This is an authentic Porter Cable replacement part that has been sourced from the original manufacturer to be used with air compressors. The durable plastic shroud is used to house and protect the pump assembly. This item is available as an individual replacement part.

$12.20

DRAIN VALVE

Part #N286039

When using an air compressor, moisture naturally builds up inside the tank as air is compressed. If this water isn’t drained regularly, it can lead to internal rust and damage over time. That’s where the drain valve comes in—it allows you to release the built-up water and keep your tank in good condition. Located at the bottom of the tank...Read more

Read less

$7.44

ISOLATOR 3 POINT MOU

Part #ACG-19

Common Symptoms of the IRFB412

How this model fails, and the parts that fix it.

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

The air was bypassing the compressor gaskets and cylinder wall was worn out

18 of 24 people found this instruction helpful.

Charles from GARRISON, TX
Easy
30 - 60 mins
Screw drivers, Socket set

1 remove cover
2 unhook air line to tank
3 remove head bolts
4 remove intake from head
5 remove flywheel bolt to free up pump piston
6 remove screw on top of piston to change out gasket
7 remove the cylinder sleeve install piston from the top
8 reassemble piston rod end and the flywheel
9 on th ... Read more

Read less

Was this helpful?

Can't find this special screw used on many housings etc

4 of 6 people found this instruction helpful.

Tim from Tucson, AZ
Very Easy
15 - 30 mins

Actually don't like using Torx bits because they are hard to center deep in the channel. I had misplaced these forcing me to order replacements.
My plan is to insert Torx bits before screwing in and using jb weld to secure the bit to the screw, giving me a hex head. Can't find this special screw with a hex head. This screw is called ... Read more

Read less

Was this helpful?

Broken ground on original plug

2 of 2 people found this instruction helpful.

Debra from PRESCOTT VLY, AZ
Really Easy
15 - 30 mins
Screw drivers

Removed cover & old cord.
Replaced with new cord & replaced cover.
Works perfect.

Was this helpful?