IBS300DS03 Whirlpool Wall Oven - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Thermal Fuse – Part Number: WPW10545255
$44.61
In Stock
Thermal Fuse
★★★★★
★★★★★
(71)
Part #WPW10545255
This thermal fuse is a manufacturer-approved replacement part for your oven. It is common for the oven to lose power after completing a self-cleaning cycle, and the thermal fuse is often at fault. Replacing the blown fuse is a fairly easy repair, and involved removing the top of the oven to swap out the fuse. Make sure to turn off the power source to the oven before beginning this repair.
Touch-Up Paint - White – Part Number: 72017
No Longer Available
Touch-Up Paint - White
★★★★★
★★★★★
(23)
Part #72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.
Dryer Screw – Part Number: WP90767
$10.40
In Stock
Dryer Screw
Part #WP90767
This screw is sold individually.
Thermostat – Part Number: WP4449751
$145.93
In Stock
Thermostat
★★★★★
★★★★★
(4)
Part #WP4449751
If your oven isn’t heating properly or seems to be getting too hot, the high-limit thermostat might be the issue. This part helps keep things safe by shutting off the heat if the temperature gets too high. It’s built to last and helps protect your oven from damage. Replacing a faulty thermostat can fix problems like uneven cooking or an oven that won’t start. Just be sure to unplug the oven before installing the new part.
Range Screw – Part Number: WPY706189
$9.85
In Stock
Light Cover Lens – Part Number: WPW10412722
$29.95
In Stock
Light Cover Lens
★★★★★
★★★★★
(2)
Part #WPW10412722
This oven light lens cover is a durable, heat-resistant component designed to shield the interior light bulb from heat, debris, and everyday wear while still allowing bright, clear illumination inside the appliance. Made from sturdy plastic, it features a simple, straightforward design that makes installation quick and easy when replacing a cracked or damaged cover. The lens is typically clear or slightly frosted to diffuse light evenly throughout the oven cavity. Because this part is used across a wide range of appliances, it’s important to confirm that it matches your specific model to ensure a proper fit.
Broil Element – Part Number: WPW10260252
$135.62
In Stock
Broil Element
★★★★★
★★★★★
(1)
Part #WPW10260252
This broil element generates the high heat needed for broiling and for cooking from the top of the oven. Installed at the top of the oven cavity, it helps provide even heating for browning, roasting, and broiling foods. You may need to replace this part if the oven is not heating properly, food is cooking unevenly, or the existing element is visibly damaged or sparking. Replacing a faulty broil element can help restore proper oven performance and ensure more consistent cooking results.
Light Bulb – Part Number: WPW10412711
$43.85
In Stock
Bake Element – Part Number: W11545804
$105.55
In Stock
Bake Element
★★★★★
★★★★★
(1)
Part #W11545804
This bake element is found on the bottom of the oven.
GASKET-OVN – Part Number: W11623080
$85.42
In Stock
GASKET-OVN
★★★★★
★★★★★
(1)
Part #W11623080
A worn oven-door seal can allow extra heat to escape while food is cooking. This replacement gasket forms a barrier around the oven opening when the door closes. Check for broken clips, loose sections, burns, tears, or areas that no longer spring back after being pressed. Before replacing the gasket, make sure the door closes evenly and the hinges are not bent or loose. Disconnect power and wait until every surface is cool. Wear gloves to protect your hands from sharp edges. Follow the service diagram when releasing the old fasteners, then seat the new gasket evenly without using unapproved glue or sealant.
Spray Paint - 12 oz. - White – Part Number: 350930
No Longer Available
Door Hinge – Part Number: W10825778
$82.17
In Stock
Door Hinge
Part #W10825778
This door hinge supports smooth opening and secure closure of the appliance door. Proper alignment helps maintain sealing and prevents unnecessary strain. Replacing a worn hinge restores stability and ease of use.

Common Symptoms of the IBS300DS03

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
After running oven in BROIL for lengthy period, entire oven shut off, thermal fuse blown
26 of 30 people found this instruction helpful.
  • JAMES P from UPATOI, GA
  • Very Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
USE 2 PEOPLE FOR SAFETY! SWITCH OFF OVEN POWER BREAKER!! Remove screws attaching oven to wall opening, slide out entire oven just far enough to get to 2 screws on either side of controls, remove those screws (may need stubby screwdriver), lift control front, opens forward, have 2nd person hold control panel cover while removing centered thermal fuse (plugs on both ends, may need needle-nose pliers to grip plug on fuse.) Remove old fuse, plug in new one. Close control panel, replace side screws, TEST POWER BEFORE pushing oven back into wall, replace wall-holding screws. Less than 30 minutes. EXTRA PERSON MAKES EASY!
Was this helpful?
Thank you for voting!
Thermal fuse blew while oven was in use and we had a power outage.
15 of 19 people found this instruction helpful.
  • Jeffrey from TOWNSEND, TN
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Thanks to PartSelect they suggested to try a new thermal fuse first. They also gave a brief description of how to install it. There advice was right on. Replaced the fuse in about 20 minutes from throwing the breaker to turning it back on.

Instructions: Turn off breaker. Remove oven door. Remove screws holding it to cabin et. Remove racks. Slide oven out about four inches. Remove four screws holding control panel. Remove thermal fuse. Replace thermal fuse and put it back together.

Thank you PartSelect. Thermal fuse cost me about $28.00 with shipping. This repair would have cost a couple of hundred if I had to call a repair technician.
Was this helpful?
Thank you for voting!
Scratches in Surface
83 of 227 people found this instruction helpful.
  • Michelle from Richardson, TX
  • Really Easy
  • Less than 15 mins
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Was this helpful?
Thank you for voting!