The interior light of your refrigerator is controlled by a switch that is activated when the door is opened and closed. If your refrigerator light will not turn on, there could be an issue with the sw...
This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. This part has been updated by the manufacturer and may appear different t...
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Pat
December 17, 2019
Where can i purchase a replacement door handle (19") for Haier refrigerator model no. Ht21ts80sp? Any suggestions/thoughts would be greatly appreciated.
For model number HT21TS80SP
Hello Pat and thanks for writing.
Door handle Part Number: PS12723385 is in the list of compatible items for your model. We hope this helps. Please contact us anytime.
2 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Caroline
May 16, 2023
Do you sell a thermostat for this model refrigerator?
For model number HT21TS80SP
Hello Caroline, thank you for the question. The part you are looking for is the thermostat, part number PS12583141. We hope this helps!
2 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Glen
March 30, 2024
Everything on the shelves in refrigerator freeze and the freezer part temperature goes to below 0. It runs an do not stop at all
For model number HT21TS80SP
Hello Glen, thank you for getting in touch. According to our research, the issue is most probably with the temperature control thermostat, part number PS12583141. It regulates the temperature in the refrigerator. You may need to replace it to fix the issue. We hope this solves your problem!
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Cindy
June 16, 2024
Is the above Haeir model the same as HT21TS85SP? I am looking for the Height, width and depth of the 80sP
For model number HT21TS80SP
Hi Cindy, thank you for your inquiry. No, both models are different. The dimensions of your model are approximately: 66-3/8" H x 31-1/4” W x 33-7/8” D. We hope this information is useful!
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Barbara
March 6, 2020
Where can i find a replacement glass shelf for this refrigerator?
For model number HT21TS80SP
Hello, Thank you for the question. I looked up the part and it is listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
I applied some tips learned by reading other reviews. So before I started I grabbed my trusty vise grip pliers and a small screw driver. I locked onto the switch actuator, the part that the refrigerator door pushes in, with the vise grips and pulled on it just hard enough to get the screw driver inserted in the right side to push in the catch clip so the switch could be pulled out further each time the catch clip was depressed to the next detent. Then I used the screw driver on the left site to encourage the switch past the detents on the left and very quickly the switch was out of the mount. The wires from the refrigerator pulled out with the old switch. I unplugged the old switch from the wires and plugged in the new switch and shoved the new switch back into the mount, wiggled it a couple of times to make sure it was secure and the job was done. Once I applied the vise gripes at first, the whole job took less than a minute.
Poped out with screwdriver the old swithch and unplugged the two wires. Plugged in the wires to the new swithch and pushed it back in the hole where the old switch was before.
While the switch did last for 9 years, the design is poor due to the failure mode. The failure should be to fail off or not able to turn on the lights which would be inconvenient but would not warm the refrigerator contents. Arcing at the contacts eventually caused the switch to "weld" closed. It is not obvious that this is occurring so it took some time to recognize why the temp inside the ref was high while the freezer was OK. Replacing the switch was easy once it was recognized as the problem. All that was required to replace the switch was to remove the screws holding a fiber cover and then pulling off the aluminum cap which covered the switches. Unplug the switch an squeeze the keeper on the switch to release it and pull down. Pop the replacement switch in place and plug the wires harness back in. All in all it took much less time to replace than it has to write this up. T Pope
