HT21TS78RS Haier Refrigerator - Overview

Sections of the HT21TS78RS

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
LIGHT SWITCH – Part Number: WR23X37285
LIGHT SWITCH
★★★★★
★★★★★
(9)
PartSelect #: PS16554876
Manufacturer #: WR23X37285
The interior light of your refrigerator is controlled by a switch that is activated when the door is opened and closed. If your refrigerator light will not turn on, there could be an issue with the sw...
  No Longer Available
DOOR – Part Number: RF-2300-727
DOOR
PartSelect #: PS5574420
Manufacturer #: RF-2300-727
  No Longer Available
SOCKET LAMP – Part Number: WR23X30413
SOCKET LAMP
PartSelect #: PS12727312
Manufacturer #: WR23X30413
  No Longer Available
21 EVAPORATOR DRIP PAN – Part Number: WR17X27464
21 EVAPORATOR DRIP PAN
PartSelect #: PS12172808
Manufacturer #: WR17X27464
  No Longer Available
REFRIGERATOR CRISPER BIN – Part Number: WR71X27392
REFRIGERATOR CRISPER BIN
PartSelect #: PS12345187
Manufacturer #: WR71X27392
  No Longer Available
BLADE EVAP FAN Assembly – Part Number: WR60X27275
BLADE EVAP FAN Assembly
PartSelect #: PS12172985
Manufacturer #: WR60X27275
  No Longer Available
Motor Condenser Fan – Part Number: WR60X27315
Motor Condenser Fan
PartSelect #: PS12172987
Manufacturer #: WR60X27315
  No Longer Available
TOP RAIL – Part Number: WJ86X21742
TOP RAIL
PartSelect #: PS12171959
Manufacturer #: WJ86X21742
  No Longer Available
Glass Shelf – Part Number: WR71X27385
Glass Shelf
PartSelect #: PS12666645
Manufacturer #: WR71X27385
glass
  No Longer Available
COLD CONTROL HOUSING - 2015 – Part Number: WR14X27309
COLD CONTROL HOUSING - 2015
PartSelect #: PS17139726
Manufacturer #: WR14X27309
  No Longer Available
EVAPORATOR – Part Number: WR87X30286
EVAPORATOR
PartSelect #: PS12583266
Manufacturer #: WR87X30286
  No Longer Available
TEMPERATURE CONTROL – Part Number: WR09X30047
TEMPERATURE CONTROL
PartSelect #: PS12583141
Manufacturer #: WR09X30047
  No Longer Available

Common Symptoms of the HT21TS78RS

[Viewing 2 of 2]
Light not working
Fixed by
these parts
Fixing
Show All
Fridge too warm
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sticking Light Switch
I applied some tips learned by reading other reviews. So before I started I grabbed my trusty vise grip pliers and a small screw driver. I locked onto the switch actuator, the part that the refrigerator door pushes in, with the vise grips and pulled on it just hard enough to get the screw driver inserted in the right side to push in the catch clip so the switch could be pulled out further each time the catch clip was depressed to the next detent. Then I used the screw driver on the left site to encourage the switch past the detents on the left and very quickly the switch was out of the mount. The wires from the refrigerator pulled out with the old switch. I unplugged the old switch from the wires and plugged in the new switch and shoved the new switch back into the mount, wiggled it a couple of times to make sure it was secure and the job was done. Once I applied the vise gripes at first, the whole job took less than a minute.
Parts Used:
LIGHT SWITCH
  • Jonathan from Lilburn, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
121 of 177 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The refrigirator light would not come on.
Poped out with screwdriver the old swithch and unplugged the two wires. Plugged in the wires to the new swithch and pushed it back in the hole where the old switch was before.
Parts Used:
LIGHT SWITCH
  • Jania from Novato, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
26 of 44 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Switch failed on which kept the refrigerator warm due to heat generatered by light bulbs.
While the switch did last for 9 years, the design is poor due to the failure mode. The failure should be to fail off or not able to turn on the lights which would be inconvenient but would not warm the refrigerator contents. Arcing at the contacts eventually caused the switch to "weld" closed. It is not obvious that this is occurring so it took some time to recognize why the temp inside the ref was high while the freezer was OK. Replacing the switch was easy once it was recognized as the problem. All that was required to replace the switch was to remove the screws holding a fiber cover and then pulling off the aluminum cap which covered the switches. Unplug the switch an squeeze the keeper on the switch to release it and pull down. Pop the replacement switch in place and plug the wires harness back in. All in all it took much less time to replace than it has to write this up. T Pope
Parts Used:
LIGHT SWITCH
  • Terry from Simi Valley, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
19 of 33 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!