HMV9307 Microwave - Overview

Models starting with HMV9307

Click on the best match to narrow your results.

Parts for models starting with HMV9307

View More

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
MICROSWITCH – Part Number: 00614767
$37.80
In Stock
Turntable Shaft – Part Number: 4370W3A001A
$13.15
Special Order
Turntable Shaft
Part #4370W3A001A
Hardware Mounting Kit – Part Number: 3861W1A043C
$48.35
In Stock
Hardware Mounting Kit
Part #3861W1A043C
Micro Switch – Part Number: 6600W1K001D
$24.15
In Stock
Charcoal Filter – Part Number: 00492599
$86.86
Special Order
Charcoal Filter
Part #00492599
Glass Cooking Tray – Part Number: 00437757
No Longer Available
Glass Cooking Tray
Part #00437757
This tray rotates in your microwave ensuring more even temperatures.
Capacitor – Part Number: 0CZZW1H004B
$60.45
In Stock
Capacitor
Part #0CZZW1H004B
Store the electrical energy needed by a microwaves high-voltage heating system with this replacement capacitor. During cooking, the capacitor works with the transformer, diode, and magnetron to help create the energy that heats food. A faulty capacitor may be linked to no heat, loud buzzing, or a fuse that blows when cooking begins. However, these signs can also come from other high-voltage components, so proper testing is important. Microwave capacitors may hold a deadly electrical charge even after the power cord is unplugged. For this reason, testing and installation must be completed by a qualified appliance service technician.
Read less
Microwave Motor – Part Number: 00423628
$112.38
Special Order
Microwave Motor
Part #00423628
Grease Filter – Part Number: 00492600
No Longer Available
Grease Filter
Part #00492600
LAMP – Part Number: 00423878
$49.26
In Stock
LAMP
Part #00423878
BRACKET – Part Number: 00492592
$44.28
Special Order
MOUNTING BRACKET – Part Number: 00492598
No Longer Available
MOUNTING BRACKET
Part #00492598
View More

Common Symptoms of models starting with HMV9307

How this model fails, and the parts that fix it.

Won’t turn on
Fixed by
these parts
Fixing
Fixing
Show All
No heat
Fixed by
these parts
Fixing
Fixing
Show All
Doesn’t shut off
Fixed by
these parts
Fixing
Show All
Tray won’t turn
Fixed by
these parts
Fixing
Show All
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken door micro switch. (unit does not start heating)
37 of 68 people found this instruction helpful.
  • JAMES from BILLINGS, MT
  • Very Easy
  • 30 - 60 mins
  • Screw drivers
Unplug the unit before servicing. Need phillips screwdriver. Open door. Use step ladder to access and remove 2 small screws from top of the room air diffuser at top of unit. Slide diffuser slightly to the left to align the diffuser's plastic tab on the left side to rotate toward you. (The wires for the front control panel are at the far l eft side of this difuser, but difuser is slotted for easy removal). Once the difuser is removed you will see 1 screw at the top that secures the pannel cover on the left side of the unit. Remove screw and slide this panel slightly up and out. This exposes the plastic frame that holds the upper and lower door switches. To locate the door switches and observe how they work, close and open the door and watch the door (bayonets) open and close the micro switches. Do the (red) buttons on top of the switches move up and down when the door bayonets push and release? If the buttons do not "pop" up when opened the switch is defective. The switch frame is secured with 2 screws. Remove screws and rotate the unit out for easy access to the micro switch(s). The internal (spring?) on my unit that is suposed to allow the red (visible) button on top of the switch to "pop" up when the door is opened was broken. Carefully pry the switch outward while being careful to lift the plastic holder-piece that holds the switch in place. Be careful, there is a small pin on the frame, so rotate the switch OUT toward you while lifting (carefully) the plastic holder-piece (you will see it on top of the switch). You can use an ohm meter to test the continuity of the switches. But if the buttons don't "pop" they are defective. Replace switch and reassemble.
Read less
Was this helpful?
Thank you for voting!
Door sensor switch went bad. Microwave would not operate.
15 of 29 people found this instruction helpful.
  • Randall from ARCADIA, CA
  • A Bit Difficult
  • 1- 2 hours
  • Pliers, Screw drivers
Watched a couple of repair videos on Youtube by searching for the model number. Found out what to do in order not to get shocked by the powerful capacitor.
Ordered the two switches (To be sure, I could have ordered a third switch as suggested in the videos.)
Bought a tamper-proof star bit to get the cover off. Followed the dir ections to replace the switches. - I broke the harness and had to use some super glue, but it's all good. I should have removed the harness instead of trying to get a switch out while it was still in place.
It's all back together, and the wife is happy!!
Read less
Was this helpful?
Thank you for voting!
everything worked except it wouldnt cook
11 of 21 people found this instruction helpful.
  • Joseph from N VERSAILLES, PA
  • Very Easy
  • 30 - 60 mins
  • Screw drivers
tested all 3 of the door switche for continuity, the top switch was faulty, replaced it,for approx $4.00 and saved a $350 dollar microwave.
Was this helpful?
Thank you for voting!
View More