Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jack
December 21, 2023
My built in microwave door handle breaks off at two sides ( plastic part) for model hmv3051c/02, but I found the door handle on the list is stainless steel and looks like a straight lever, is it a replacement package?
For model number HMV3051C
Hi Jack,
Thank you for your question. We show the handle, part number PS8730886, to be slightly curved. If you need the supports for them, the part number for them is PS8728127. They are sold individually. We hope this helps!
Can you give me a part number and price for a door open / close switch for this microwave, please ? The switch must be shorting out because it blows the 20a fuse when opening the door. Thanks , john d.
For model number HMV3051C
Hello John,
Thank you for your question. The door switch for your model is under part PS8728113. Hope this helps!
Replaced fuse and switches.This is an undercabinet microwave. The fuse is located in top right but there is no access from the front of the microwave necessitating complete removal of the microwave from the cabinets and then taking the microwave cover off. This is a terrible design, Instead, I cut the vent grate on the top right front of the microwave to access the fuse. replaced the fuse. Switches were relatively easy to replace...being careful to not pull wires out of connectors or breaking small plastic tongs and clips. Microwave is still blowing fuses though. door alignment may be off. Again, terrible design and lousy product quality.
The door just lifts off of the Microwave and then I popped the plastic frame off of the inside of the door with a flat head screwdriver. Next I unscrewed the metal frame with a phillips screwdriver and then the old broken support. Once I put the new handle support on with the handle then just put the 2 frame parts back on & replace the door to the microwave. It's easy and there are youtube videos if you have a problem