HLP21N Haier Washer - Overview

Hello Shadia, thank you for reaching out. According to our research, we recommend checking the fill hose, part number PS12582971. If it is clogged, clean it, and if it is bad or broken, replace it. If the issue remains, the water inlet valve, part number PS12343364, is probably faulty and needs to be replaced. Before replacing this part, we suggest checking the water level sensor, part number PS12582956. The caster wheel compatible with your model is part number PS12343533. This part is sold individually. We hope this information helps!

Hello Jocelyn, thank you for getting in touch. These symptoms indicate a water supply issue, drain issue or water flood error. Ensure both hot and cold water faucets are fully turned on. Make sure the water supply hoses are not kinked, which restricts water flow. If the washer is not getting enough water, you will need to check the water inlet valve, part number PS12343364. If the valve is faulty, it will restrict the in flow of water. Examine the drain hose and make sure it is not blocked or kinked and is positioned correctly to allow water to drain out. If water is unable to drain out, the issue could be with the drain pump, part number PS12582967. We hope this helps.

Hello Jessica, thank you for reaching out. If your washer is not filling with water, we suggest that you check the following parts: the inlet hose, water inlet valve, lid switch, and pressure switch. Inspect these components for any damage or blockage and replace the defective part to resolve the issue We hope this helps. Good luck with this repair.