This burner cap is for cooktops. Burner cap fits on top of the burner head. The burner cap protects the burner head from spills and helps spread out the burner flame for even heating.
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Larry
January 19, 2024
is it possible to check a igniter before installing it ?
For model number HGS5042UC01
Hi Larry, thank you for your question. Yes, you can test the igniter before installing. You may need to test it with a multimeter. Rotate the dial to the lowest setting for ohms of resistance. Use a probe to touch one of the igniter terminal and the second probe to touch the other terminal. If the meter reading shows a result between 0 and 1100 ohms of resistance, the igniter has continuity. However, if the meter's needle does not move or the digital display does not change significantly, there is no continuity, which means the igniter has burned out. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
