This washer or dryer selector knob allows you to easily choose cycles by connecting to the control panel’s rotary shaft. Made from durable white plastic with a chrome accent, it provides a secure fit and smooth operation. Replacing a cracked, loose, or broken knob can help restore proper cycle selection and resolve issues such as the appliance not starting or the timer not advancing.
This washer drain hose assembly is a genuine OEM replacement designed to connect the washer pump to the drainage system, ensuring proper water removal during cycles. Made from high-grade rubber for durability and leak prevention, it helps maintain efficient draining and prevents water damage. Replace this part if you notice leaks, slow dr...Read moreaining, or complete failure to drain. Installation is straightforward—disconnect power and water supply, remove the old hose, and secure the new one for reliable performance.
This top-load washer suspension rod and spring assembly helps stabilize the wash tub and reduce movement during operation. It supports the drum throughout the wash and spin cycles, minimizing vibration, noise, and excessive shaking. Replacing a worn or damaged suspension assembly can help correct issues such as the washer vibrating, movin...Read moreg, making unusual noises, or failing to spin properly, restoring smoother and more balanced performance.
This washer start-button assembly and backsplash initiates the wash cycle and helps control basic start and pause functions. It’s typically replaced when the machine won’t start, the start light stays on, or the washer won’t pause as expected. Built for durability, it installs easily by unplugging the appliance, removing the backsplash or...Read more control trim, swapping the old switch assembly for the new one, and reconnecting the wiring before reassembling the panel.
This washer suspension rod and spring assembly is designed to help stabilize the tub in a top-load washing machine, reducing excessive vibration and noise during operation. By supporting the tub and maintaining proper balance, it helps prevent shaking, banging, and off-balance errors, especially during the spin cycle. A worn or damaged su...Read morespension rod can cause the washer to move, spin improperly, or wash unevenly. Replacing this component—often done as a set—can restore smooth operation, improve washing performance, and extend the life of the appliance.
This lid lock striker assembly engages with the lid locking mechanism to ensure the appliance operates only when the lid is properly closed. Secure engagement is essential for safe operation and uninterrupted cycles. Replacing a worn or broken striker can resolve issues such as failure to start or mid-cycle shutdowns, restoring proper safety operation and dependable performance.
This mode shifter assembly helps your appliance switch between wash and spin cycles seamlessly. Its durable construction ensures smooth transitions and dependable performance, making it essential for proper cycle operation.
This lid lock is a replacement safety component designed to secure the lid during operation. It helps prevent unintended opening and is commonly replaced when locking mechanisms fail or become unreliable.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Harry - For model number GTW460BMK1WW
August 14, 2021
Washing machine began spinning without water in it's own one day. So i unplugged it to make it stop. When i plugged it back in, it just continued spinning again. Then circuit board died. This g.E. Washing machine is only 4 years old. Purchased at home depot, september 2017.
Hi Harry,
Thank you for your question. If the washer is turning on by itself and spinning, then there is an issue with the electronic control board and you will need to replace it. The part number listed under your model number for the electronic control board is PS11774703. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
Recently, a fast ra-ta-tat machine-gun-like sound comes when hot water is filling the machine. Sometimes it goes away by itself. It is pretty loud, like 1st time I thought it was the neighbour hammer drilling. What could be the cause of that? The machine has been in service for 10 years. Any recommendations for replacement?
Cheers
Hi Afshin, thank you for reaching out. The water inlet valve is responsible for controlling the flow of water into the washing machine. If it's malfunctioning, it could cause a rattling or tapping noise as the water flows through. Its part number is PS12069194. You may need to replace it to fix the issue. We hope this sorts out your problem!
I replaced drain pump and drive belt and now it makes a constant washing noise when turned off.
Hi Vicki, thank you for getting in touch. Ensure that you have installed both parts properly. If the belt is too tight or not seated correctly, the motor can stay under load and keep making noise. Make sure the belt sits flat on the pulleys. A pump that isn’t installed properly can also keep humming. You may need to inspect both of them and reinstall them if necessary. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Valerie - For model number GTW460BMK1WW
June 19, 2024
My washer isn’t filling with enough water
If set at Super it only fills an inch
Hi Valerie, thank you for reaching out. We would suggest checking the water line for clogging first. If it is fine, the issue could be with the water inlet valve, part number PS12069194. You may need to replace it to fix the issue. We hope this solves your problem!
Lid won’t lock, control buttons don’t respond, machine makes water sucking noise and no water in tub. Only way I can stop this is by unplugging power. Had it unplugged 2 days and it does the water sucking noise when I plug in to power. Machine woke me up at night making that water sucking noise. Don’t know how long that was going on. Machine 3 or 4 years old . I’m upset!
Hello Evelyn, thank you for getting in touch. Based on the description that you have provided, we would recommend checking the triac controller, part number PS11774703, to fix the issue. We hope this solves your problem!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Washer would not spin properly, belt was worn
9 of 9 peoplefound this instruction helpful.
Robin from MOUNT VERNON, TX
Easy
30 - 60 mins
Socket set
Took off belt/motor housing and replaced belt. Put housing back on. Very easy.
Was this helpful?
Thank you for voting!
water pump replacement
3 of 3 peoplefound this instruction helpful.
Vikki from CORDOVA, TN
Really Easy
30 - 60 mins
Socket set, Wrench set
went online to replace water pump on washer site and followed directions. Very easy installment.
Was this helpful?
Thank you for voting!
Belt frayed tangled stopped spinning
2 of 2 peoplefound this instruction helpful.
Nancy from ALTON, IL
Very Easy
Less than 15 mins
Socket set
Tilted washer got underneath took off plastic shroud 3 nut head bolt rotated belt onto pulleys easy peas when ya buy the part from this site :) perfect match no assy issues
My Orders
