This lid lock, also referred to as a door lock, is a genuine replacement component designed to secure the washing machine lid during operation. It ensures the appliance recognizes when the lid is prop...
This suspension rod and spring assembly is a manufacturer-approved replacement part designed to stabilize the washer tub during operation. Positioned on the left side of the machine, it is one of four...
Are you struggling with a malfunctioning washing machine? We have just the solution you need'the GE Drain Hose. This simple but essential part is tailor-made for washing machines, tasked with safely d...
Designed to regulate water flow during wash cycles, this inlet valve assembly manages both hot and cold water entry into your washing machine. Common signs of a failing valve include improper filling,...
Having trouble with your GE washer? Our Nut Hub could be just the solution you need. This little device has a big job ? it tightly secures your washer hub to the gear case shaft. Its accuracy helps yo...
This large white washer lid is a genuine OEM replacement for top-load washing machines, designed to cover the drum securely, prevent water splashing, and ensure safe operation during wash cycles. Buil...
Ask our experts a question about this model and we'll get back to you as soon as possible!
18 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
LISA
May 3, 2023
SQUEEKING, CHIRPING LIKE METAL ON METAL SOUND WHILE AGITATING.
For model number GTW460ASJ7WW
Hi Lisa, thank you for reaching out. Based on our understanding of the issue, we would suggest you check the clutch, part number PS11729473, as it is the most likely cause of this issue. If it is faulty, you may need to replace it. We hope this solves your problem!
3 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Duke
December 7, 2021
Machine is making squealing sound and clothes are very wet at end of cycle
For model number GTW460ASJ7WW
Hello Duke, thank you for your question. Overloading can lead to an imbalance that reduces the washer's spin speed, leaving clothes too wet after spin cycle completes. If the washer leaves clothes soaked after a large load, remove some items, redistribute others and run another rinse and spin cycle. The squealing noise while running, the main culprit is usually worn Motor Pulley & Nut PartSelect Number PS16619249. Good luck with your repair.
2 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Jim
November 29, 2019
Washer will not spin..any suggestions what I need? thanks..jim
For model number GTW460ASJ7WW
Hi Jim, most likely fix is door lock PS12343280. Thank you for your question and good luck with your repair!
1 personfound this helpful.
Was this helpful?
Thank you for voting!
G Michael
December 22, 2019
The washer will not drain or spin...doesnt seem to be moving to the next cycle. even placjng the washer on the drain and spin setting, the washers fills with water 1st, even its already over 1/2 full of water but empty of clothes, on the small load size setting, proceeds to a wash cycle, agitator ran for a regular amount of time, then it just stops with wash cycle and lid locked lights illuminated, but doesnt do anything else.
For model number GTW460ASJ7WW
Hello,
Thank you for your question. If the washer is not draining or spinning, the door lock may not be working correctly. If this part is malfunctioning, it can cause issues throughout the washer. There are some other parts that you should check as well. You will also need to check the lid lock striker, the speed sensor and the drain pump. You will need to test the electronic parts with a multi-meter. Here is a link to one of our videos on YouTube that you may use as a general reference on how to use one, https://www.youtube.com/watch?v=bWC44fHn0As. We hope this helps. Thank you and have a great day!
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Jeff
June 16, 2021
My washing machine for no explainable reason will start beeping and lights will flash sometimes while it is running or not until we unplug it for a couple of hours
For model number GTW460ASJ7WW
Hello Jeff, Thank you for the question. In most cases the beeping indicates an issue with the Spin cycle. The appliance is sensing an off balance load or spinning slow. We suggest testing the Speed Sensor. If you are using a multi-meter to test the resistance, the readings should be around 1 or OL is it isn't defective. If it is closer to 0, then it is a short circuit and is defective. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Drain all the water out of the tub with a shop vac Remove rear drain hose and drained rest of water into a bucket Remove small rear panel (bottom left hand corner) where the drain hose connects Tipped washer up about 45 degrees to get underneath it - Supported it with a few paint cans Remove internal drain hose/clamps from pump - w/ pliers Remove belt cover (gray plastic) with socket - 3 bolts Remove wire assembly plug from socket Remove old drain pump with socket - 3 bolts Install new drain pump - 3 bolts - plug wire assembly into socket Reinstall belt cover - 3 bolts Reinstall hose to drain pump (note panel will be inside washer) Feed drain hose panel through hole and reinstall - 1 nut Re attached drain hose to exterior drain plug You are done !
Very simple to repair. Be sure to drain the tub outside or into the sump pump then lay the washer on its side. The pump is right there on the bottom of the basket with 3 bolts. You will also need to remove the belt cover to get to the plug. So simple and saves you hundreds off repair man prices.
I thought it was the control board from the onset, but 'Online experts" said it was more likely the mode shifter or the lid lock. I ordered one of each, did not correct problem. Ordered the control board that was designated for this unit, it did not correct problem. Defective? Was send replacememnt, did not fix problem. Twice? Phone conversation with parts person, and after a little digging, it was NOT the correct board, correct board was not available. Returned all parts, refunds all around. Ordered correct board from another site, installed, programed, SUCCESS! Total repair time/installation-less than 15 minutes. Getting the correct part 30 days.
