This lid lock, also known as a door lock, is a genuine OEM replacement part for your washing machine. The lid lock keeps your washer lid closed during the washing cycle. If this part is broken, your w...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Beverly
February 27, 2020
I live in apt it comes with a GE washer it also has the deep rince button and the agitator top comes off easiely so is it possible it comes with the feature liq fabric soft dispenserif so its missing the pieces that go in the agiator part looks like 2 pieces pleased let me know id like to take part in the feature
For model number GTW220ACK4WW
Good Day Beverly. Thank you for your question in regards to your unit (Model Number GTW220ACK4WW). Based on our research, there is a Short Agitator Cap (PartSelect Number PS12073992) and a Screw (PartSelect Number PS11759130) that go inside the top of the Agitator on your unit. You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
Was this helpful?
Thank you for voting!
Danna
February 15, 2023
the 2" circle around the agiator, not part of the stainless steel tub has a sharp object protruding through the rubber coating and is snagging clothes. Can this part be replaced?
For model number GTW220ACK4WW
Hi Danna, thank you for contacting us. According to our research, we recommend you replace your agitator, part number PS16542670, as it is damaged. We hope this sorts out your problem!
Was this helpful?
Thank you for voting!
Danna
February 17, 2023
I originally sent in a question about the 2” wide plastic ring around the base of the agitator. It is not part of the agitator but a separate piece. Your answer said replace agitator which is not the problem. Can you look at a picture of the inside of this model, serial #ZH1014226?
Thank you.
For model number GTW220ACK4WW
Hi Danna,
Thank you for your question. If you are referring to the black ring that is around the shaft that the comes out from the bottom of the tub, it is part of the platform/transmission. The part number listed under your model number for the platform/transmission is PS16729509. If you would like to place an order for it, please call our customer service line and anyone will be happy to assist you. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Drain all the water out of the tub with a shop vac Remove rear drain hose and drained rest of water into a bucket Remove small rear panel (bottom left hand corner) where the drain hose connects Tipped washer up about 45 degrees to get underneath it - Supported it with a few paint cans Remove internal drain hose/clamps from pump - w/ pliers Remove belt cover (gray plastic) with socket - 3 bolts Remove wire assembly plug from socket Remove old drain pump with socket - 3 bolts Install new drain pump - 3 bolts - plug wire assembly into socket Reinstall belt cover - 3 bolts Reinstall hose to drain pump (note panel will be inside washer) Feed drain hose panel through hole and reinstall - 1 nut Re attached drain hose to exterior drain plug You are done !
Very simple to repair. Be sure to drain the tub outside or into the sump pump then lay the washer on its side. The pump is right there on the bottom of the basket with 3 bolts. You will also need to remove the belt cover to get to the plug. So simple and saves you hundreds off repair man prices.
