This is a replacement O-ring for the drum bearing retainer on your dryer. The drum bearing is found at the back of the dryer drum. The O-ring is designed to create a seal on the drum bearing. The O-r...
This OEM replacement dryer slide bearing is white in color, and approximately 3 inches long. The slide bearings are supportive linings for your dryer. If they have eroded, or are damaged, the drums wi...
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Laurie
July 12, 2022
Will not turn on. Pause button changes display from 0-2 then repeats. Plugged in and all lights flash when restarted.
For model number GTD72EBPN0DG
Hi Laurie,
Thank you for your question. If your dryer will not start, there are some parts that you will need to check to see which one is causing the issue. You will need to check the drive belt, the door switch and the fuse. We have included a link that you may reference on how to check these parts. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
Dryer run but don’t heat try all settings won’t dry clothes
For model number GTD72EBPN0DG
Hi Larry, thank you for reaching out. Based on the description that you have provided, we would recommend replacing the inlet temperature thermistor, part number PS1766014. We hope this sorts out your problem!
Front inside top grinding noise when running however when I stop the dryer and push up on the drum and rotate the drum there is no noise. Sounds like a front drum bearing.
For model number GTD72EBPN0DG
Hello Greg, thank you for reaching out. Based on our understanding of the issue, we would suggest checking the drum support bearing, part number PS11736622, to solve the problem. Glad to be of help!
Was this helpful?
Thank you for voting!
Vickie
4 days ago
Lights flashing then displays 1 or 2 this happened after electric was off and came back on it will not reset
For model number GTD72EBPN0DG
Hello Vickie, thank you for reaching out. Based on our research, you may need to select the personality settings of the dryer. Pressing the start button toggles between valid personalities. To set the display to the correct personality, you may need to select 1, as your dryer is electric. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Removed the front Dryer panel. Left drum in place and lifted it up slightly to get access to motor drive. Slipped belt in place and put panel back on. This was a first attempt ever at fixing an appliance and it was no big deal.
I had to take most of the dryer apart because there is no rear access to the motor. It turned out to be easy to dissasembel the dryer. The only problem that I had was that I could not figure out how to route the belt around the motor and the idol pullies. I could not find anywhere that gave instructions on how to properly tension the belt. I finally figured out that the idoler pulley needs to be locked in place on the right side of the engie mount. Then the belt needs to be routed over idoler pulley and under the motor pulley. Finally release the idoler pully from the locked postion to put tension on the belt. It really turned out to be pretty easy.
Pryed off the top with a flat head screwdriver and removed the 2 screws holding the front panel to the sides. Then lifted the front panel off of the bottom brackets. Belt fit perfectly and followed the provided instructions to loop it around the motor and pulley. PartSelect got the part to me within a couple of days and the repair was a snap.