GTD40EBMK0WW General Electric Dryer - Overview

hello Sheldon, Thank you for the question. First you need to unplug the dryer from its power source. Remove the screws on the back of the console. Open the console carefully. Locate the buzzer inside the console. It should have 2 wires. Pull one of the wires out of the buzzer and tape the wire ends with electrical tape and replace the console. We hope this helps.

Hello Douglas, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12309436. We looked up the part and it is listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers and contact us back with he updated substitution number. We hope this helps!

Hello and thank you for writing. How to Disable a Dryer's Buzzer Turn off and unplug the dryer. Since you need to remove the front panels and expose the electrical wiring of the dryer's buzzer you should turn the dryer off and then unplug the machine to avoid shocks. Locate the buzzer. Pull the buzzer's wires. Test the machine. We hope this helps. Please contact us anytime if you require further assistance.

Hello Timmy and thanks for writing. It certainly sounds like a faulty Timer PS12113398 check for signs of damage, and replace it if needed. We hope this helps. Please contact us anytime.

Hello Douglas, Thank you for the question. If the appliance is powering on but will not start to tumble and heat up, it is normally a defective Door Switch. Normally the dryer would not have an auditable click once locked. We hope this helps!