This carbon-activated air filter is designed for refrigerators equipped with Pure Air Ultra II filtration systems. It helps maintain a fresh interior environment by absorbing strong odors from foods l...
This is a genuine Frigidaire part for your refrigerator. This is an ice maker, which connects to the water lines to provide fresh ice. The most common reason to replace this part is if your refrigerat...
The PurePour water filter is compatible with Frigidaire, Frigidaire Gallery and Professional side-by-side and French Door refrigerators with PurePour ice and water filtration. This genuine Frigidaire ...
This genuine OEM hinge mounting screw is designed for use in Frigidaire and Electrolux refrigerators, providing a secure and reliable way to fasten door hinges to the cabinet. Built with a durable hex...
Sold individually.
This is a genuine part. The handle mounting shoulder screw (no.10 ab) is made for use with many refrigerators. The metal screw helps to fasten the handle assembly to the outer do...
This temperature sensor, also known as a thermistor, is responsible for preventing the evaporator within your refrigerator from overheating during its defrosting cycle. This sensor is compatible with ...
This freezer basket hanger, also known as a drawer slide rail, is a genuine OEM replacement part for the freezer compartment of your refridgerator. This hanger is for the left side. Pull out the front...
This gray gasket helps your refrigerator door seal tightly to keep cold air in and warm air out. It’s made from flexible silicone with a magnetic strip to ensure a snug fit. If your fridge isn’t cooli...
Don't let a faulty drawer rail keep your refrigerator from performing at its best. Turn to our authentic, OEM Basket Hanger and breathe new life into your appliance. Made especially for the right side...
$73.46
Special Order
Questions And Answers for GRSS2652AF3
Ask our experts a question about this model and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lynn
December 13, 2024
How do I change water filter
For model number GRSS2652AF3
Hello Lynn, thank you for asking. Push the old filter in and it comes out. You may need to reset water filter status by holding the water filter button for 3-5 seconds after you change the filter. If the water filter replacement light is still on, check the filter to make sure it is inserted properly and there is no debris in the base. Then try resetting the filter again. We hope this helps.
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Ginny
August 30, 2025
I need the part number for the pull out clear drawer in the freezer please
For model number GRSS2652AF3
Hello Ginny, thank you for your inquiry. The freezer drawer for your model is part number PS17629868. We hope this information is useful!
Hello Mark, thank you for getting in touch. We would recommend making sure that the power cord is working fine. If the problem persists, then you may need to check the main power board, part number PS17219335, to solve the problem. A faulty power control board can most probably cause this issue. We hope this helps!
How do you remove the old air filters in this model and replace the new air filters.
For model number GRSS2652AF3
Hi Carolyn, thank you for reaching out. To replace the air filter, pull the air filter housing straight out. Remove the old filter and discard it. Unpack the new filter and place it inside the housing. Slide the housing back into position. Activate or reset the air filter status light on the control panel. We hope this information helps!
Was this helpful?
Thank you for voting!
Sherry
May 22, 2025
I need the light for water/ice dispenser
For model number GRSS2652AF3
Hello Sherry, thank you for reaching out. The light for the water and ice dispenser is not sold separately, it comes as a part of the dispenser module, part number PS17219209. We hope this information is useful!
I checked the dampener, it worked. The compressor and fan worked. I knew because my freezer was still hovering around 10 degrees. Coils were clean. Thermistor was the only thing it could be. Took all my shelves out. Removed four screws. Took the back panel off. The thermistor sits tucked in on the side. I piped it out, in clipped it. Used my multimeter to test the numbers. Numbers were off just a bit. Ordered the part. Crossed my fingers.,took less then 5 minutes to put the part in. Plugged in the fridge. It was sitting at 33 degrees in about an hour and a half. I can’t believe I fixed it. I knew NOTHING about refrigerators. For how big my fridge is, it would have cost 3,000 and up to get a new one with the same cu ft size. Instead, it cost me $44. That includes shipping. Thank you Parts Select!! Made it so easy to pick the correct part for my model fridge!
Simple three steps... 1) There's an front section to the ice-maker to take off. One Phillips screw is on the side, one screw is underneath near the inside of the refrigerator wall. Just unscrew and store. 2) There's a small plastic unit just inside the ice maker to take out. It's held in by a small nut that requires about a 4" extension to reach. (You may be able to unscrew the nut with small needle-nose pliers). Just unscrew and take out the unit - the unit functions just to keep the ice maker wiring in place. 3) The wiring looks a mess, but there's just one wiring connector to the ice maker assembly. Unsnap it. The ice maker is not screwed in, it just slides in -- reach in and pull the assembly straight out; when it stops, lower it a bit and it will come free. Reverse the instructions to install the new unit.
pulled old gasket out of groove in door. Put vaseline on slotted part of gasket that fits in groove of refri. door Put some vaseline on gasket surface that would be on the hinge side of door, so it would close with ease. Had no problems at all. Thanks
P.S. Sorry about not having the model No. The Part No was PS1991324 Magnetic Gasket for Refr side of a Freezer/Refrigerator FRIGIDAIRE There are no screws to remove on this model. Just start at one corner and begin pulling old gasket out of the groove of the door.
