This OEM refrigerator filter is for french door and side-by-side door types and is located in the back, top-right of your appliance. By absorbing heavy metals, pharmaceuticals, pesticides, chlorine, a...
$99.12
In Stock
Order within the next 0 mins and your part ships today!
This carbon-activated air filter is designed for refrigerators equipped with Pure Air Ultra II filtration systems. It helps maintain a fresh interior environment by absorbing strong odors from foods l...
$46.88
In Stock
Order within the next 0 mins and your part ships today!
This is a genuine Frigidaire part for your refrigerator. This is an ice maker, which connects to the water lines to provide fresh ice. The most common reason to replace this part is if your refrigerat...
$151.07
In Stock
Order within the next 0 mins and your part ships today!
This genuine OEM hinge mounting screw is designed for use in Frigidaire and Electrolux refrigerators, providing a secure and reliable way to fasten door hinges to the cabinet. Built with a durable hex...
$32.89
In Stock
Order within the next 0 mins and your part ships today!
Sold individually.
This is a genuine part. The handle mounting shoulder screw (no.10 ab) is made for use with many refrigerators. The metal screw helps to fasten the handle assembly to the outer do...
$29.95
In Stock
Order within the next 0 mins and your part ships today!
This temperature sensor, also known as a thermistor, is responsible for preventing the evaporator within your refrigerator from overheating during its defrosting cycle. This sensor is compatible with ...
$14.25
In Stock
Order within the next 0 mins and your part ships today!
This freezer basket hanger, also known as a drawer slide rail, is a genuine OEM replacement part for the freezer compartment of your refridgerator. This hanger is for the left side. Pull out the front...
$78.30
In Stock
Order within the next 0 mins and your part ships today!
This gray gasket helps your refrigerator door seal tightly to keep cold air in and warm air out. It’s made from flexible silicone with a magnetic strip to ensure a snug fit. If your fridge isn’t cooli...
$114.12
In Stock
Order within the next 0 mins and your part ships today!
Don't let a faulty drawer rail keep your refrigerator from performing at its best. Turn to our authentic, OEM Basket Hanger and breathe new life into your appliance. Made especially for the right side...
$73.46
Special Order
Questions And Answers for GRSS2652AF1
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Roy
September 12, 2025
Need the vegetable and fruit drawer with wheels
For model number GRSS2652AF1
Hello Roy, thank you for getting in touch. The crisper drawer, part number PS16543778, and part number PS16543779, are compatible with your model number. We hope this helps.
Hello Evelyn, Thank you for writing. The Water Filter for this model is shown as PartSelect #: PS11704498 and the Air Filter is PartSelect #: PS12586284. Thank you for the great question!
Can not change freezer temperature it is stuck on -6f
For model number GRSS2652AF1
Hi Don, thank you for reaching out. We would suggest checking the thermistor, part number PS11775596. It senses the temperature inside the refrigerator and sends information to the electronic control. You may need to replace it to fix the issue. We hope this sorts out your problem!
Simple three steps... 1) There's an front section to the ice-maker to take off. One Phillips screw is on the side, one screw is underneath near the inside of the refrigerator wall. Just unscrew and store. 2) There's a small plastic unit just inside the ice maker to take out. It's held in by a small nut that requires about a 4" extension to reach. (You may be able to unscrew the nut with small needle-nose pliers). Just unscrew and take out the unit - the unit functions just to keep the ice maker wiring in place. 3) The wiring looks a mess, but there's just one wiring connector to the ice maker assembly. Unsnap it. The ice maker is not screwed in, it just slides in -- reach in and pull the assembly straight out; when it stops, lower it a bit and it will come free. Reverse the instructions to install the new unit.
I checked the dampener, it worked. The compressor and fan worked. I knew because my freezer was still hovering around 10 degrees. Coils were clean. Thermistor was the only thing it could be. Took all my shelves out. Removed four screws. Took the back panel off. The thermistor sits tucked in on the side. I piped it out, in clipped it. Used my multimeter to test the numbers. Numbers were off just a bit. Ordered the part. Crossed my fingers.,took less then 5 minutes to put the part in. Plugged in the fridge. It was sitting at 33 degrees in about an hour and a half. I can’t believe I fixed it. I knew NOTHING about refrigerators. For how big my fridge is, it would have cost 3,000 and up to get a new one with the same cu ft size. Instead, it cost me $44. That includes shipping. Thank you Parts Select!! Made it so easy to pick the correct part for my model fridge!
pulled old gasket out of groove in door. Put vaseline on slotted part of gasket that fits in groove of refri. door Put some vaseline on gasket surface that would be on the hinge side of door, so it would close with ease. Had no problems at all. Thanks
P.S. Sorry about not having the model No. The Part No was PS1991324 Magnetic Gasket for Refr side of a Freezer/Refrigerator FRIGIDAIRE There are no screws to remove on this model. Just start at one corner and begin pulling old gasket out of the groove of the door.
