GM-L268NQJM (ASWCSE1) LG Refrigerator - Overview
Sections of the GM-L268NQJM
[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Crisper Shelf Glass
PartSelect #: PS3630671
Manufacturer #: MHL42613217
Having issues with your LG refrigerators shelving? Our genuine OEM Retractable Glass Shelf is here to help. Its not just an ordinary shelfthis sleek and sturdy glass panel is a practical solution spec...
$58.25
In Stock
Refrigerator Flipper Assembly
PartSelect #: PS11708993
Manufacturer #: AGU74110902
The main top guide pin guides the main top onto the body of the range and helps hold the top in position.
$122.83
In Stock
Water Inlet Valve Assembly
PartSelect #: PS3533117
Manufacturer #: AJU72992601
This includes the primary and secondary valves along with the wire harness.
$246.72
In Stock
Refrigerator Door Bin
PartSelect #: PS3613457
Manufacturer #: AAP73051302
This door bin is for refrigerators. Door bin attaches to the inside of the refrigerator door and mostly holds jars and bottles.
$100.97
In Stock
Door Holder
PartSelect #: PS3535435
Manufacturer #: MEG61899901
This is a manufacturer-approved refrigerator door closure for your refrigerator. It is made of white plastic and measures approximately 3 inches by 2 inches. If your old closure is damaged, your refri...
$20.85
In Stock
Refrigerator Compressor Overload Protector
PartSelect #: PS3603394
Manufacturer #: 6750CL0001D
The compressor overload protector attaches to the compressor and shuts off the compressor if the compressor motor draws too much current.
$51.65
In Stock
ROLLER ASSEMBLY
PartSelect #: PS3640036
Manufacturer #: AHJ73130001
This roller assembly supports smooth movement of drawers or internal components, reducing friction and strain. Quiet, easy motion improves usability and helps prevent wear. Replacing a worn roller res...
$28.55
In Stock
Defrost Sensor Assembly
PartSelect #: PS3636324
Manufacturer #: 6615JB2005N
Looking for a reliable solution to keep your LG refrigerator or freezer in prime condition? Our genuine OEM Defrost Sensor Assembly from LG could be just what you need. Designed specifically to fit ...
$57.15
In Stock
Thermistor Assembly
PartSelect #: PS3644971
Manufacturer #: EBG60663205
This thermistor assembly monitors temperature changes and provides accurate feedback to the control system. Designed for precision, it supports proper regulation and efficient operation.
$116.43
In Stock
BASKET ASSEMBLY,DOOR
PartSelect #: PS3613460
Manufacturer #: AAP73051502
This refrigerator door bin is designed to provide convenient and secure storage for jars, bottles, and other frequently used items on the inside of the refrigerator door. Made from durable white plast...
$89.88
In Stock
Common Symptoms of the GM-L268NQJM
[Viewing 5 of 5]Leaking
Fixed by
these parts
these parts
Show All
Door won’t open or close
Fixed by
these parts
these parts
Show All
Not dispensing water
Fixed by
these parts
these parts
Show All
Ice maker not making ice
Fixed by
these parts
these parts
Show All
Fridge and Freezer are too warm
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
replace leaking water inlet valve assembly
1. Shut off water to refrigerator. 2. Removed bottom sheet metal cover (6 screws). 3. Removed leaking water inlet valve assembly from refrigerator (1 screw). 4. Remove water inlet tube (loosen nut) and tube back to refrigerator (pull from water valve after remove cotter pin washer). 5. Detach two electrical wire harnesses. 6. Install new water inlet valve assembly to refrigerator (1 screw). 7. Replace both water tubes to water inlet assembly. 8. Re-attach both wiring harnesses. 9. Turn water to refrigerator on. 10. Check for leaks. 11. Re-attach bottom sheet cover (6 screws).
Parts Used:
-
Richard from JACKSONVILLE, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
42 of 75 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken shelf glass
-
george from PARAMUS, NJ
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Spring broke on flapper door
Took 2 screws out , pushed flapper up, unhooked wire connector, reversed to install new door. Less than 5 minutes. So easy , a caveman could do it.
Parts Used:
-
Michael from EASTLAKE, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
5 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!