This door spring is approximately 7 inches long. The dishwasher door spring applies tension to the dishwasher door through the door hinge to prevent the door from dropping too quickly when the unit i...
This part is the replacement tub gasket for your dishwasher. It is black in color and is made of rubber. The tub gasket fits around the circumference of your dishwasher tub, and creates a seal that pr...
This is a replacement upper spray arm with gasket for your dishwasher. The spray arm is made of gray plastic and is approximately 16.5 inches in length. The gasket is black in color and is approximate...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joan
January 19, 2020
Can you tell me what year model this GE dishwasher is? And price range if available.
For model number GLDA696F00SS
Hello and thank you for writing.
Additional to the model number we also need the serial number to establish the year of your unit. Looking forward to your reply, please always include the model number. We hope this helps. Please contact us anytime if you require further assistance.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Sam
August 10, 2021
The dish washer when its about to drain stops and shuts off and the water remains in the bottom. I pulled out the machine and checked the hose and everything seems to be working just fine but its not draining at all.
For model number GLDA696F00SS
Hello Sam, Thank you for the question. If the appliance is not draining during the rinse cycle or the end of the washer, you may have a defective Drain Pump. We hope this helps!
I have GE Dishwasher GLDA696F00SS and during the cycle it leaks. I ordered part #PS1481855 Door Gasket Assembly which said it fits my dishwasher. However I do not see any specific installation videos for my dishwasher bottom gasket replacement. Any tips or advice? Can you confirm it will fit as well?
Thank you
For model number GLDA696F00SS
Hi Aaron, Thank you for the question. We do not have a video for this model sorry. You will need to move the door panel to gain access to the old gasket to remove it and install the new gasket. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
We ordered a whole new set for the lower rack and even though they were smaller than the original ones, we replaced them all and now the rack slides in and out of the dishwasher with ease!
Pulled dishwasher partly out from cabinet. Removed door after disconnecting springs. Removed old gasket easily. The new gasket was the correct part but would not slip into the place of the original. The door sheet metal was crimped onto the original gasket at the factory with some kind of tool to hold it securely. Had to spread the sheet metal with a screwdriver to get the new gasket in place and used silicone seal to keep in position. Re-assembled the door after the silicone seal was dry and replaced dishwasher into the cabinet. So far it is working fine! Overall this gasket was not easy to change.
I pulled the dishwasher out, and discovered that the translucent pipe leading up the back of the machine was leaking at the point at which it fed into the middle tray.