This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoid on the valve open and close according to the desired amount of water needed.
The circulation pump adapter, or pump adapter assembly connects the circulation pump to the tub of your dishwasher. If your dishwasher is leaking around this adapter, check the connection to ensure ev...
This is a handle actuator for your dishwasher. It is made of black plastic, and is sold individually. The handle actuator is found in the control panel, and it releases the door latch when you lift th...
This switch interlock is found on your dishwasher door, and it must be actuated for the dishwasher to start. If your dishwasher door does not close properly, or if the machine will not start, you may ...
This is the replacement fine filter hub nut for your dishwasher. It is made of white plastic and is approximately 3 inches in diameter. The fine filter hub nut is also known as the lower spray arm hub...
This door recess spring or dispenser lever spring in your refrigerator is used to return the ice door to the closed position or the dispenser lever to the home position once released. You will find th...
This is the tub gasket replacement for your dishwasher. The tub gasket fits around the perimeter of the door and forms a seal that prevents the dishwasher from leaking when it is filled with water. If...
$69.30
Special Order
Questions And Answers for GLC5604V00WW
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kim
October 31, 2022
Is there parts for replace the coupler that connects to the tap. Or does the whole thing need to be replaced with hoses too?
For model number GLC5604V00WW
Hi Kim, thank you for reaching out. According to our research, this part does not come separately, you need to replace the entire hose and coupler assembly, part number PS2322319. We hope this helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
I am converting this dishwasher from portable to under the counter (built in) and was wondering what is the size of hose I need to connect to the discharge valve (outlet) under the dishwasher?
For model number GLC5604V00WW
Hello Rich, Thank you for your inquiry. According to the installation manual listed on our site (which we have provided a link to) it states that you need 3/8 inch copper tubing for the water line, and PS1517235 as 10 ft drain hose, and PS2322319 as the fill and drain hose coupler assembly. We hope this helps.
After the dishwasher has completed a full cycle and is now shut off, There is a noise like running water coming from the inside bottom of machine. The noise goes on for a few minutes then stops. There looks like there is water sitting under the screen
Can u tell me what’s happening, is something broken?
For model number GLC5604V00WW
Hello Karen, thank you for contacting us. According to our research, we would recommend checking the sump filter, part number PS2370522, and drain and fill hose assembly, part number PS2322319. If the issue still occurs, we would recommend checking the drain pump, part number PS2370525. We hope this solves your problem!
All I had to do is take out the rack, pop off the old wheels, place the new stud rollers on, then pop on the new wheels. So easy and now my dishes don't get chipped when I pull the rack out and push it back in. I wish I didn't wait so long to order new parts.
Pull old rack out, slip new one in! One thing i did was order wheels and studs as i was unaware they lower rack came fully equiped with all wheels,studs, and flip up dish dividers. So if your replacing the rack no need to order the wheels! The diagram made it look as if you only et the wire rack and not all the added pieces.