This water filter purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it is causing reduced water flow or just replaced periodically per the...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This compressor start relay is for refrigerators. The compressor start relay attaches to the compressor and helps start the compressor motor. Safely store any food that could deteriorate while the pow...
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light ...
This is a replacement pivot block for your refrigerator. It is made of white plastic and is approximately 4 inches long and 1 inch wide. The pivot block catches and holds the door mullion cover when y...
This part is the replacement water filter cover for your refrigerator. The cover protects the water filter to prevent damage. If the water filter cover is cracked or missing, you should replace it. It...
$91.73
In Stock
Questions And Answers for GI5FSAXVY01
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
George
December 6, 2019
Where is thermistor for fridge located, not freezer fridge
For model number GI5FSAXVY01
Hello George, Thank you for the question. Here is a link to the how to video on installing the thermister. This will show the location. Hope this helps!
https://www.youtube.com/watch?v=3qaE8zcOqvY&feature=emb_title
Was this helpful?
Thank you for voting!
Laura
January 7, 2020
Our freezer won’t stay cold even at -5 our fridge is warmer than normal. But freezer can’t keep anything cold
For model number GI5FSAXVY01
Hello Laura, thank you for your question. There are a few parts we would recommend testing first. They are Thermistor Part Number: 12002355, Refrigerator Compressor Start Relay Part Number: WPW10197428, Capacitor Part Number: WPW10662129 and Condenser Fan Motor Part Number: WPW10239053. I hope this helps.
Was this helpful?
Thank you for voting!
Susan
January 18, 2022
When we select water button on the door there is a red light on replace filter and refrigeration cooling off press 1 sec. We have replaced the filter and pressed to reset but nothing happened. The lockout button abs light button light up as well (blue). No water will dispense. Any suggestions?
For model number GI5FSAXVY01
Hello Susan, Thank you for your inquiry. It sounds like the child lock is turned on, press and hold the lock button for 3 seconds until the lock light turns off. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck let's give her a shot so I did give it a shot. I ordered the parts and they were there in less time than a service tech could come out and i installed the parts and guess what for 90.00 in parts and 15 minutes in time I repaired my refrigerator. Thanks guys, It took less time to order the parts than it did to make the repair so thanks, your website rocks and is very well designed so my hat is off to you guys!
I removed the drop-down outer housing by gently prying the sides of the two pivot pins at the rear. This gave me move 'room' to grip and slightly rotate then pull the old filter forward and away from the tight suction connection. I was concerned that I would be too forceful for the plastic assemblies and would break something; deliberate motions and a steady thought process on the problem helped disengage the darned old filter!