Models > GHW9150PW0

GHW9150PW0 Whirlpool Washer - Overview

Sections of the GHW9150PW0

[Viewing 7 of 7]

Manuals & Care Guides for GHW9150PW0

Click to download
Keep searches simple, eg. "belt" or "pump".
Door Handle – Part Number: WP8181846
Door Handle
★★★★★
★★★★★
(35)
PartSelect #: PS11744938
Manufacturer #: WP8181846
This handle may appear white, but is light gray in color called Platinum. This door handle for your washer is sold without screws, they can be ordered separately, or you can reuse the existing screws ...
$55.08
  In Stock
Order within the next 7 hrs and your part ships today!
Washer Door Bellow – Part Number: WP8182119
Washer Door Bellow
★★★★★
★★★★★
(21)
PartSelect #: PS11744957
Manufacturer #: WP8182119
$273.72
  In Stock
Order within the next 7 hrs and your part ships today!
Washer Baffle – Part Number: WP8182233
Washer Baffle
★★★★★
★★★★★
(21)
PartSelect #: PS11744968
Manufacturer #: WP8182233
This part moves the clothes around inside your dryer/washer and helps to direct the flow of hot air during the drying cycle. Sold individually.
$86.59
  In Stock
Order within the next 7 hrs and your part ships today!
Door Lock Latch – Part Number: WP8182634
Door Lock Latch
★★★★★
★★★★★
(21)
PartSelect #: PS11745016
Manufacturer #: WP8182634
This part is used on front load washers and includes the interlock switch assembly.
$156.47
  In Stock
Order within the next 7 hrs and your part ships today!
Drain Pump Kit – Part Number: 280187
Drain Pump Kit
★★★★★
★★★★★
(27)
PartSelect #: PS1485610
Manufacturer #: 280187
This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time. This part is used on front load models.
$225.28
  In Stock
Order within the next 7 hrs and your part ships today!
Water Inlet Valve – Part Number: WP8181694
Water Inlet Valve
★★★★★
★★★★★
(22)
PartSelect #: PS11744913
Manufacturer #: WP8181694
Used with some front load washers. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
$96.05
  In Stock
Order within the next 7 hrs and your part ships today!
Touch-Up Paint - White – Part Number: 72017
Touch-Up Paint - White
★★★★★
★★★★★
(16)
PartSelect #: PS385132
Manufacturer #: 72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.18
  In Stock
Order within the next 7 hrs and your part ships today!
Control Knob – Part Number: WP8181859
Control Knob
★★★★★
★★★★★
(3)
PartSelect #: PS11744940
Manufacturer #: WP8181859
This knob is light gray and is used on platinum-colored models. Sold individually and accepts a D-shaped shaft.
$59.05
  In Stock
Order within the next 7 hrs and your part ships today!
Shock Absorber – Part Number: WP8182703
Shock Absorber
PartSelect #: PS11745030
Manufacturer #: WP8182703
Shock absorbers help keep the washer from vigorous shaking during its cycles. Sold individually.
$65.01
  In Stock
Order within the next 7 hrs and your part ships today!
Flowmeter – Part Number: WPW10110225
Flowmeter
★★★★★
★★★★★
(9)
PartSelect #: PS11748313
Manufacturer #: WPW10110225
This part continually measures the amount of water entering the tub. It will make adjustments if too much or too little water is present.
$142.21
  In Stock
Order within the next 7 hrs and your part ships today!
Temperature Sensor – Part Number: WPW10467289
Temperature Sensor
★★★★★
★★★★★
(5)
PartSelect #: PS11755214
Manufacturer #: WPW10467289
This part regulates the temperature of the water in the tub. The sensor is located in the heating element.
$47.46
  In Stock
Order within the next 7 hrs and your part ships today!
Drive Belt – Part Number: WPW10388414
Drive Belt
★★★★★
★★★★★
(6)
PartSelect #: PS11754067
Manufacturer #: WPW10388414
This drive belt is made to slip on the motor pulley to bring the basket up to the speed required and this makes the belt get wear and tear. NOTE: Per Manufacture, belt measures 48.22" long uninstall...
$71.54
  In Stock
Order within the next 7 hrs and your part ships today!

Questions And Answers for GHW9150PW0

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

18 questions answered by our experts.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Thomas Vonblohn
December 12, 2019
My washer won’t run it brings up F. Dl
For model number GHW9150PW0
PartSelect logo
Hello Thomas, thank you for your question. That error code indicates a door lock error on the machine. When the door fails to lock to allow the cycle to begin, it attempts to lock itself at least six times before the error appears on the digital display screen. When the door fails to lock, the machine won't run at all. We would recommend replacing PartSelect Number: PS11745016. I hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Harish
June 7, 2023
Washer fill with water even when no in use. What part do I need to fix this.
For model number GHW9150PW0
PartSelect logo
Hello Harish, thank you for contacting us. According to our research, the issue seems to be with the water inlet valve, part number PS11744913. Sometimes, the water inlet valve solenoid gets jammed due to calcium deposits in the open position. You may also perform a continuity test using a multimeter to test the water inlet valve solenoid. We hope this solves your problem!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Linda
March 20, 2024
I NEED A NEW WATER FLOW SENSOR
For model number GHW9150PW0
PartSelect logo
Hi Linda, thank you for reaching out. The water flow meter for your model is part number PS11748313. We hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Novel
February 8, 2020
Why does machine make bumping noises when spinning
For model number GHW9150PW0
PartSelect logo
Hi Novel. The first thing to check would be to make sure your washer is level and your springs are not worn out/are secure. Thank you for your question and good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Chris
December 12, 2019
Tub is vibrating and the plastic on the front of the tub piece is broke like warn down legos out of balance or something and rip the front plastic apart.
For model number GHW9150PW0
PartSelect logo
Hello Chris, Thank you for the question. I suggest checking for wear or damage tot he Shock Absorbers, PartSelect Number PS11745030. Hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
  • 2
  • 3

Common Symptoms of the GHW9150PW0

[Viewing 14 of 14]
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not drain
Fixed by
these parts
Fixing Fixing Fixing
Show All
Lid or door won’t close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not agitate
Fixed by
these parts
Fixing Fixing Fixing
Show All
Marks left on clothes
Fixed by
these parts
Fixing Fixing
Show All
No hot or cold water
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door latch failure
Fixed by
these parts
Fixing Fixing
Show All
Burning smell
Fixed by
these parts
Fixing
Show All
Draining Issues
Fixed by
these parts
Fixing
Show All
Spins slowly
Fixed by
these parts
Fixing
Show All
Water Filling Issues
Fixed by
these parts
Fixing
Show All
Locking Issues
Fixed by
these parts
Fixing
Show All
Touchpad does not respond
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
broken plastic washer door handle
Just required removal of two screws, placing the new handle and reinstalling the two screws. Easiest repair I've ever done!
Parts Used:
Door Handle
  • dave from woodway, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
540 of 549 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bellows were moldy, needed to replace
The first step is to remove the retainer ring that holds the outside of the bellow in place.
To do this, Open the washer door as far as you can to get it out of the way. look underneath of the front of the bellow on the outside of the washer where it meets the door. Put your head almost on the floor and look up.
You will find a spring streached about 3" connected to a small diameter wire (1mm.) that runs all the way around the outside portion of the bellow.
Use a small screwdriver or other to pull and pry the spring away from the rubber bellow. Be careful not to damage the spring or ring. Once you have grip on it, pull it carefully toward you then up and off of the bellow.

The front portion of the bellow is now free and can be peeled off. Start at any point and pull the rubber bellow in toward the opening of the washer, it comes off easily.
When you get to the detergent outlet on the upper left side, grab the plastic tube and carefully pull the bellow from around it. There is no adhesive or clamp holding this in place, just friction. Remove the rest of the front portion of the bellow.
Push as much of the bellow into the washer as possible to get it out of the way.

Once this is off comes the slightly tricky part. Look up at the top right portion of the bellow that is still attached. You may need to feel with your hand but you should be able to see it. You are looking for the screw/nut end of a giant hose clamp. This hose clamp goes around the entire bellow and the secures it to the portion that holds the basket.
This is where the stubby screw driver comes in handy. There is not nearly enough room for a standard one and a nut driver or wratchet are too big. The nut will be pointing down and will need to be replaced the same way.
Loosen the hose clamp almost all of the way, not necessary to have the hose clamp come completely apart.
You can now remove the entire hose clamp from around the bellow by pulling it forward.
You will need to remove the hose clamp from the washer. To do this, squeeze it in from the sides about 6", don't kink it. Push it down toward the floor between the basket and the metal front panel. You will now be able to remove it from the top of the opening and be able to pull the bottom portion out.
Pull the old bellow completely out, very easy to do.

Time to install the new bellow. Figure out which side goes in and which faces out. The big hint is that the water inlet is on the upper left side.
You will notice at the top of the bellow on the portion that goes inside of the washer, you will find a small triangular shaped tab about 1/4" high. This is your centering mark. This will be at the very top. If you keep this at the top, everything will line up perfectly.

Slip the bellow over the edge of the portion that holds the basket where you removed the old one. I started at the top and worked left so I could install the detergent inlet tube. Pull this through the bellow carefully. It doesn't take a lot of force.
As you are pressing the bellow on this lip, you will notice that there is a 1/2" high back stop all of the way around. This is great because as you press it on, there is a positive stop and you can't go further than necessary. Continue to press it in all of the way around.

Now it is time to install the Hose clamp. Un bend anything that might have bent on the clamp. With the nut at the top or top right with the nut facing down to the floor while holding it vertically, squish it slightly inward, put the bottom portion in first then the top portion. Orient is as it was when you took it off. Slide it around the bellow. You will feel a positive stop.
Grab the stubby screwdriver and tighten down the hose clamp. I did about a medium force when tightening. It doesn't take a lot of force.

Now it is time to pull the remaining part of the bellow out of the basket and fit it into place. Press it around the outside portion of the opening so it hooks over the lip. This w
Parts Used:
Washer Door Bellow
  • Franck from Annandale, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
364 of 391 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer would not drain ,F02 and SUD code displaying
(1) First I unpluged the washer then I removed the water from the tube with a water vac.(2) Then I removed the three (3) screws that holds the front panel, using a Torx T-20 socket. ( this is a front load washer ). The panel is below the loading door.
(3) I packed towels under the washer.
(4) I slowly removed the cleanout in the front of the pump, using the water vac to catch the water as it leaked out.
(5) I removed the wiring to the motor.
(6) I removed the screw that holds the pump in place with a Torx T-20 socket.
(7) I pulled the pump forward so the clamps that hold the drain hose and discharge hose could be removed using the hose clamp pliers. ( they come off much easier then they go back on ).
(8) I tested the pump and found it would run but was making a lot of noise and running slow.
(9) To reinstall start with number (7) and work backwards to number (1) skipping (3) and (4).
Don Kramer
Wichita, Kansas
Parts Used:
Drain Pump Kit
  • Donald from Wichita, KS
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Socket set
233 of 245 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!