GH400 (Type 1) Black and Decker Trimmer - Overview

Diagrams for GH400

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
On-off Switch – Part Number: 383994-00
$7.44
In Stock
On-off Switch
Part #383994-00
This is a Genuine Manufacturer Sourced replacement part used on a variety of Black and Decker Trimmers/Edgers. This item is Sold Individually. Switches are a commonly replaced part in power tools, handling on/off operations. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement.
Washer,Spring – Part Number: 157315-00
No Longer Available
Washer,Spring
Part #157315-00
Nut,Hex – Part Number: 99368-01
No Longer Available
Nut,Hex
Part #99368-01
Blade,Polarized – Part Number: 151625-00
No Longer Available
Blade,Polarized
Part #151625-00
Contact,term. – Part Number: 87486-00
$7.44
Special Order
Contact,term.
Part #87486-00
This is a genuine DeWalt replacement part that has been sourced from the original manufacturer to be used with electric trimmers. The copper contact is used to link the switch assembly to the extension cord assembly. This contact is sold as a single item, please note the other contact is sold separately.
Black Knob – Part Number: 90519954
$7.44
Special Order
Black Knob
Part #90519954
This is a genuine replacement part sourced directly from the manufacturer. The black knob is commonly found in Black & Decker trimmers and edgers. This part is made of high-quality plastic, and is used to help secure the handle on the tube assembly. You will require a wrench when replacing this product. This item is sold as an individual replacement part.
Support,Brg – Part Number: 90521886
No Longer Available
Support,Brg
Part #90521886
Brush – Part Number: 387542-00
$7.44
Special Order
Brush
Part #387542-00
This replacement carbon brush is a genuine OEM authorized replacement designed for use with trimmers/edgers. This carbon brush is sold individually. Please note, brush holders and springs are sold separately. Carbon brushes are a commonly replaced part on power tools. Due to friction and normal use brushes will gradually wear down and will require replacement. It is advised to replace both brushes at the same type. You would need a screwdriver to complete this job. • Make sure the unit is unplugged • First remove the screws holding the housing together • One you are able to access the motor you can remove old brushes • Install the new brushes • Re-assemble and test your tool
Support,Bearing – Part Number: 380097-00
No Longer Available
Support,Bearing
Part #380097-00
Ring,retaining – Part Number: 037653-00
$7.44
Special Order
Ring,retaining
Part #037653-00
Included in part number 395930-01
Plastite Screw – Part Number: 330019-05
$7.44
Special Order
Plastite Screw
Part #330019-05
This replacement screw is a high-quality component which is supplied by the original equipment manufacturer for use with power tools. It is a standard hardware which may have multiple applications depending on the model of your equipment, please make sure to check appropriate diagrams of your model for the correct location and use of this item. Keep in mind this high-quality screw is made of durable metal and is sold individually.
Screw,thd.form – Part Number: 330019-25
$7.44
Special Order
Screw,thd.form
Part #330019-25
This replacement screw is a high-quality component which is supplied by the original equipment manufacturer for use with Black and Decker, Porter Cable and DeWalt power tools. It is a standard hardware which has multiple applications depending on the model of your equipment, please make sure to check appropriate diagrams of your model for the correct location and use of this item. This high-quality metal screw is sold individually.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken power input terminal
8 of 22 people found this instruction helpful.
  • Curtis from Huntsville, AL
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
I found this unit by the side of the road. One power input terminal was loose. Inside it was broken. Replacement was to remove the screws, pull out the wire, and cut the wire next to the terminal. I was able to strip the wire and crimp it in the terminal. I then soldered both terminals for a good connection.
Was this helpful?
Thank you for voting!