GH1100-B2C (Type 1) Black and Decker Trimmer - Overview

Diagrams for GH1100-B2C

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Hex Wrench – Part Number: 604407-02
$7.44
Special Order
Hex Wrench
Part #604407-02
Screw – Part Number: 681914-00
$7.44
In Stock
Screw
Part #681914-00
Genuine Black and Decker replacement part, this item is sold individually. This screw is used to secure the line cutting blade located on the trimmer guard on the models shown below. Depending on the model you have you may need one or two of these.
Cord Protector – Part Number: 770235
$7.44
Special Order
Cord Protector
Part #770235
This replacement cord protector is an authentic component which is supplied by the original equipment manufacturer for use with DeWALT and Black and Decker power tools. It fits through the opening in the housing where the power cord is wired, it will protect the base of the cord from getting bent or pinched. It is made of high-quality rubber material and it is sold individually.
Screw – Part Number: 821057-00
$7.44
Special Order
Screw
Part #821057-00
Blade Bolt – Part Number: 371954-01
$7.44
Special Order
Blade Bolt
Part #371954-01
This specialized item is designed to secure the blade on hedge trimmers. It is a genuine OEM replacement part and it is sold individually. Please note that to install or remove this blade bolt you would need a phillips head screwdriver.
Screw – Part Number: 5103541-00
$7.44
Special Order
Screw
Part #5103541-00
This screw is an original replacement part manufactured for use with power tools, and outdoor lawn and garden equipment. This versatile screw has many applications depending on the tool, or machine it is used with. This pan head phillips screw is sold individually, please see model diagram for part location and use.
Cord Clamp – Part Number: 821070
$7.44
Special Order
Cord Clamp
Part #821070
Genuine Dewalt replacement part, this item is sold individually. The purpose of this Cord Clamp is to hold the cord in place inside the tool to keep it from pulling out. It is installed just inside of the handle. There are two screws used to hold the Cord Clamp in place. The part number for the screw is different depending on your model number.
Dual-line Replacement Spool – Part Number: DF-080
No Longer Available
Dual-line Replacement Spool
Part #DF-080
This is a genuine Black and Decker replacement part, it is sold individually. The propose of the DF-080 Replacement Spool is to dispense the cutting line for the trimmer models below. This is a dual line trimmer. The diameter of the line used in this spool is 0.080
Belt – Part Number: 90552006
$15.04
Special Order
Belt
Part #90552006
This is a genuine Black and Decker replacement part, it s sold individually. This belt is installed on the drive pulley and driven pulley on the motor assembly on the models listed below. The flex shaft is connected to the larger pulley which rotates the spool and cutting line on the trimmer. Over time the cogs on the belt will become worn and the belt will have to be replaced.
Locknut,m5 – Part Number: 477344-00
$7.44
Special Order
Locknut,m5
Part #477344-00
Button – Part Number: 478517-00
$7.44
Special Order
Button
Part #478517-00
This is an original replacement part manufactured for use with Black and Decker electric trimmers. This is rubber button that fits into the lower part of the clamshell set where the tube connects. The tube has 3 positions, or length stops, and the button is used to adjust the length. The button is sold individually.
Tube Assembly – Part Number: 478527-01
$44.08
Special Order
Tube Assembly
Part #478527-01
This is an authentic Black and Decker replacement part, sourced from the original manufacturer for use with trimmers. The hollow tube assembly is used to house the drive shafts assembly and to link the motor and trimmer head. This item is available as an individual replacement part, please see illustrated diagram for related parts.