Ask our experts a question about this model and we'll get back to you as soon as possible!
13 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Karen
February 8, 2023
We need to vent our electric dryer to the right side. Can you tell me what side vent kit will work with our model?
For model number GFD55ESSN0WW
Hello Karen, thank you for your inquiry. The side vent kit, part number PS12749181, is compatible with your model. We hope this information is useful!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Steve
March 27, 2024
Dryer powers up ok and the front control panel operates properly. Drum spins but does NOT heat. Took panels off and checked the heating element ohmed ok; checked the two safety thermostats on the heater assembly ok; checked the thermistor on the back of the blower housing ok. Checked everything I could find located in the bottom of the unit. How can I check the main ckt board located above the drum to see if this is the culprit? What am I missing to get this fixed and drying clothes again. Thanks.
For model number GFD55ESSN0WW
Hi Steve, thank you for reaching out. We have found that the issue is with the main control board, part number PS16742871. You may check the main control board if has any burn marks or areas that are shorted out. You may also use a multimeter to test for continuity between the various connections on the control board. If there is no continuity, then there is a problem with the control board, and it will need to be replaced. You can also test whether the correct voltage is being supplied using your multimeter. We hope this solves your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Morris
April 29, 2024
Brief power outage twice. Plug dryer in lights on display panel flash on - off repeatedly.
For model number GFD55ESSN0WW
Hi Morris, thank you for reaching out. Reset the unit by unplugging it for 5 mins. If this does not help, we would recommend checking the user interface control board, part number PS16873782. Good luck with the repair!
Was this helpful?
Thank you for voting!
Greg
September 13, 2021
No power could it be the main control board? Checked all power reading 240 but no power to the dryer nothing lights up
For model number GFD55ESSN0WW
Hello Greg, Thank you for the question. If there is power to the appliance and it is not powering on, it is most likely the User Interface Control Board, PartSelect Number PS16554671. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
James
July 22, 2022
we had an electrical power surge now there is no power to the dryer
For model number GFD55ESSN0WW
Hello James, thank you for your question. To reset a GE dryer, locate the reset button on the appliance. If there is no reset button, unplug the appliance directly from its power source and allow it to sit for ten minutes without power. Once the time has passed and the motor has cooled, plug it back in to see if issues have been resolved. It the board is damaged, then you will to replace part PS16554671. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Could tell from the sound it was making that it was related to drum rotation. Searched online videos on how to disassemble this model GE Dryer. The Dryer drum rides on 4 rollers. 2 of the 4 of mine were very noticeably loose and made a similar noise when I spun them by hand. Simply replace the rollers and re-assembled.
I could type out instructions, but it's much simpler to just search for the right video online.
