GB2FHDXWS09 Whirlpool Refrigerator - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Refrigerator Center Crisper Drawer Slide Rail - White – Part Number: WPW10671238
$80.02
In Stock
Refrigerator Center Crisper Drawer Slide Rail - White
★★★★★
★★★★★
(357)
Part #WPW10671238
This center crisper drawer rail supports the edges of refrigerator crisper drawers, ensuring smooth sliding and proper alignment. At 13.5 inches long, it fits between the drawers on the shelf frame. Quick and easy to install, this replacement restores stability and functionality to the crisper drawer system.
Refrigerator Crisper Frame – Part Number: WPW10568041
$151.31
In Stock
Refrigerator Crisper Frame
★★★★★
★★★★★
(51)
Part #WPW10568041
This shelf frame is an essential component for maintaining the organization and functionality of your refrigerator’s crisper or pantry area. It serves as the sturdy base for the glass shelf above the drawer, helping to keep produce and other items neatly stored. Designed to fit a variety of refrigerator models, the frame is built for long-lasting use. Please be aware that this item includes only the frame; the glass insert and center support are sold separately. Installation is simple and typically requires no tools—just slide the frame into place to restore your fridge’s storage setup.
P-Trap Drain Tube Kit – Part Number: W10619951
$52.75
In Stock
P-Trap Drain Tube Kit
★★★★★
★★★★★
(66)
Part #W10619951
Also known as a duck bill. This kit includes the tube extension piece and spacer.
Refrigerator Ice Maker Assembly – Part Number: W10884390
$173.83
In Stock
Refrigerator Ice Maker Assembly
★★★★★
★★★★★
(97)
Part #W10884390
This ice maker assembly is designed to produce and dispense ice efficiently within the freezer compartment of compatible refrigerator models. It includes a built-in shut-off arm and a wire harness for proper installation, ensuring reliable operation and integration with the appliance’s electrical system. The unit functions by freezing water into ice cubes, ejecting them into the ice bucket, and preparing them for dispensing. If your current ice maker is failing to produce ice or is not ejecting ice properly, replacement is recommended. This assembly is sold individually and does not include additional accessories or components. Installation typically involves disconnecting power, removing the old unit, and securing the new assembly in place using the provided harness and mounting points.
Touch-Up Paint - White – Part Number: 72017
No Longer Available
Touch-Up Paint - White
★★★★★
★★★★★
(23)
Part #72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.
Refrigerator Door Switch – Part Number: W11384469
$43.83
In Stock
Refrigerator Door Switch
★★★★★
★★★★★
(36)
Part #W11384469
Door switch turns the light off when you close the door.
Refrigerator Electronic Control Board – Part Number: WPW10503278
$69.52
In Stock
Refrigerator Electronic Control Board
★★★★★
★★★★★
(55)
Part #WPW10503278
This electronic control board is a critical component in refrigerator systems, responsible for regulating temperature settings and managing cooling and defrost cycles. If your appliance is experiencing issues such as inconsistent temperatures, failure to start, prolonged operation, or ineffective defrosting, replacing the control board may resolve the problem. Installation requires a small flat blade screwdriver and should be performed with the refrigerator unplugged to ensure safety. Please note that this board must be programmed after installation to function correctly. For precise installation steps and programming instructions, refer to the manufacturer’s manual specific to your refrigerator model.
Refrigerator Crisper Pan – Part Number: WP67002633
$177.84
In Stock
Refrigerator Crisper Pan
★★★★★
★★★★★
(9)
Part #WP67002633
Sold individually. Crisper drawer is an original equipment manufacturer (OEM) part that fits some bottom-freezer Kenmore, Amana, Crosley, Jenn-Air, KitchenAid, Maytag and Whirlpool refrigerators. The crisper drawer is approximately 6-7/8-inches tall, 14-inches wide and 15-inches deep.
Refrigerator Door Bin – Part Number: WPW10371194
$84.47
In Stock
Refrigerator Door Bin
★★★★★
★★★★★
(17)
Part #WPW10371194
Running out of space in your fridge door? This clear, shallow bin is perfect for organizing jars, bottles, and small items. It’s made from sturdy plastic and fits right into the door—no tools needed. Whether your old bin cracked or you just need more room, this replacement is a quick and easy fix. It works with lots of models from Whirlpool and other popular brands, so just check your fridge’s model number before ordering.
Deli Drawer Glide- Left Side – Part Number: WP67001054
$15.65
In Stock
Deli Drawer Glide- Left Side
★★★★★
★★★★★
(23)
Part #WP67001054
This is a replacement pan glide for your refrigerator. The pan glide can be found attached to the refrigerator shelf, and allows the pan to slide in and out efficiently. If your refrigerator pan will not slide in or out of place properly, or if the pan will not stay in place, you may need to replace the glide. There is a pan glide on the left and the right side of the refrigerator shelf. This part is the left side glide, so be sure to determine whether you need to replace the left glide or the right glide. This part is made of white plastic, and is approximately 15 inches long.
Refrigerator Humidity Control Slide – Part Number: WP67005864
$15.35
In Stock
Refrigerator Humidity Control Slide
★★★★★
★★★★★
(7)
Part #WP67005864
This part mounts on the crisper drawer cover and is used to limit the amount of air that gets into the crisper.
Refrigerator Deli Drawer Glide – Part Number: WP67001053
$15.65
In Stock
Refrigerator Deli Drawer Glide
★★★★★
★★★★★
(8)
Part #WP67001053
This is a deli drawer glide for the right side of your refrigerator. It allows the deli drawer to glide in and out smoothly. In order to access your glider, you will have to remove drawer and shelf, and unscrew the existing screws. Reverse and reinstall. This part is approximately 14.5 inches long, and made of white plastic.

Questions And Answers for GB2FHDXWS09

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert - For model number GB2FHDXWS09
September 6, 2023
My ice maker suddenly stopped working. There is no filter or water despinser in this refrigerator.
Chris Boyle Profile
Hi Robert, thank you for reaching out. There are a number of reasons why that could be happening. Check to make sure that the water inlet valve is getting the recommended water pressure. Water tubes are not clogged. Make sure to check the temperature settings for your freezer. The freezer should be set to 0°F (-18°C). Check the control arm to ensure that it is in the “on” position. Tighten the arm if it seems loose. Other than that, you should also check that the ice maker is installed correctly. If this does not help, you may have a bad water inlet valve, part number PS11755667. Thank you for the inquiry, good luck with the repair!
$141.69
In Stock
Water Inlet Valve
1 person found this instruction helpful.
Was this helpful?
Thank you for voting!
Ron - For model number GB2FHDXWS09
November 27, 2024
Freezer door handle is loose. How do I tighten the screws?
Chris Boyle Profile
Hello Ron, thank you for your question. To remove the door handle you will need to slide it to the right and it will slide off the brackets. There will be screws in the brackets underneath you can tighten. Good luck with the repair!
Was this helpful?
Thank you for voting!
Dawn - For model number GB2FHDXWS09
January 13, 2020
Refrigerator not working "warm" but freezer cold. What is wrong?
Chris Boyle Profile
Hello Dawn and thank you for writing. There are several parts you would need to check for damage. The electronic control board PS11755733. The damper control PS11750106. We hope this helps. Please contact us anytime if you require further assistance.
$167.79
In Stock
Refrigerator Damper Control Assembly
$69.52
In Stock
Refrigerator Electronic Control Board
Was this helpful?
Thank you for voting!
David - For model number GB2FHDXWS09
December 6, 2022
freezer frost up and leaks on floor.
Chris Boyle Profile
Hello David, thank you for your question. If there is frost build-up in your freezer then the issue is probably with the P-Trap Drain Tube Kit, part number PS8691807. If that does not take care of the issue, then the problem is most likely to be related to the Electronic Control Board, part number PS11755733. If you require assistance to place an order, please contact customer service. We hope that helps!
$52.75
In Stock
P-Trap Drain Tube Kit
$69.52
In Stock
Refrigerator Electronic Control Board
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the GB2FHDXWS09

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Freezer is cold, Refridgerator is not as cold as it should be
385 of 474 people found this instruction helpful.
  • Russell from Hardinsburg, KY
  • A Bit Difficult
  • More than 2 hours
  • Screw drivers
Having seen this problem before in other equipment so I had an idea where to look. Problem: the automatic defrost function was not operating. Looking through openings in the back panel of the freezer compartment, you could see the evaporator coils and fins were a solid chuck of ice. There are three logical components to check. Heater element, thermostat (located just above the evaporator) and a relay on the control board (located in the fridge control panel). Checked the heater with an ohm meter -- OK. The thermostat closes the circuit at around 20 degrees and opens at around 32 degrees. Pulled out the thermostat, wiring, fan unit. Everything unplugs, unscrews, and unclips, don't cut wires. Put the whole assembly in a friends freezer for an hour or so to see if the thermostat closes -- OK. Problem had to be with the control board. Replaced control board, reprogrammed it per included instruction. Everything is working again.
Was this helpful?
Thank you for voting!
Cracked & Snapped Center Crisper Rail
230 of 256 people found this instruction helpful.
  • Ruth from Roxbury, MA
  • Really Easy
  • Less than 15 mins
A very easy fix took all of five minutes
Was this helpful?
Thank you for voting!
defroster mode was not working causing freezer to ice up and refrigerator to be warm. Also fan was running continuely
189 of 228 people found this instruction helpful.
  • James from Welches, OR
  • A Bit Difficult
  • 1- 2 hours
  • Nutdriver, Screw drivers
The hard part for me was figuring out which part was causing the problem. I read what others had done and followed their test methods. I checked the defroster heater for continuity and the defroster thermostat to make sure it was closing. the defroster termostat has to be cold to check it. You will need to check it while it is in ice or t ake it out and put it in another freezer for 30 mins and then check it for continuity. Those items checked out ok so it had to be the control board. The control board is a 5 min job to replace but making sure that is your problem is the hard part. I think the control board was bad due to a power surge we had when the power went out and came back on. It might be a good idea to put a surge protector on your home to protect your fridge and all your other electronic stuff. Our refrigerator is now working like new again. Thank you for all your help, Jim
Was this helpful?
Thank you for voting!