GA5052 Makita Angle Grinder - Overview

This power cord is for power tools. Unplug the power tool before installing this part. Wear work gloves to protect your hands.

Included in part number 515616-3

This is a genuine replacement part sourced directly from the manufacturer. The retaining ring is commonly found in power tools from Makita, such as demolition hammers, grinders, and drivers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different ret...Read moreaining rings used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You may require pliers and a wrench or screwdriver when replacing this product. This item is sold as an individual replacement part.

This part is made of metal and is available individually. A wrench may be required to replace this part if it becomes broken or stripped. The hex nut fits between the drive gear and the gear housing. This is an authentic Makita replacement part that is sourced from the original manufacturer for use with angle grinders.

This manufacturer sourced replacement pin is made out rubber and it is sold individually. It acts as a cushion/spacer in a variety of Makita power tools. This is a standard piece of hardware and it has multiple applications based on your tool. Please refer to diagrams for correct application.

This is an authentic Makita replacement part that is sourced from the original manufacturer for use with grinders, impact drivers, die grinders, chainsaws, and impact wrenches. The tapping screw is used with several different types of tools and the application of the screw can vary based on the model of equipment. The screw is sold as an individual replacement part.

This is a genuine OEM sourced replacement tapping screw which is specially designed for use with Makita power tools. It is a standard hardware which has multiple applications depending on the model of your unit, please make sure to refer to the appropriate diagrams of your model for the correct location and use of this item. This high-quality item is made of durable metal and it is sold individually.

This is an authentic Makita replacement part, sourced from the original manufacturer for use with power tools. The metal washer is commonly used to disperse pressure put on a part assembly by a nut or bolt across a wider surface area. This washer is available as an individual replacement part.

This is an authentic replacement part sourced directly from the manufacturer. The ball bearing is composed of metal and plastic. It is compatible with Makita sanders, trimmers, saws and drills. Most often, the part is installed between the labyrinth rubber ring and the insulation washer. After which, the parts are placed on the armature s...Read morehaft. The ball bearing reduces friction and causes the tool to operate smoothly. It is recommended to follow specific maintenance guidelines of the tool operation manual. A screwdriver will be needed to make the necessary removal and replacement. This part is sold individually.

This Ball Bearing is shielded on both sides. It is a genuine Makita replacement part and is sold individually. • Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on ...Read morethe tool and allows it to run smoothly. • Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.