GA4570 Makita Angle Grinder - Overview

Included in part number 515616-3

Included in part number 515616-3

This is an authentic manufacturer-sourced part which is specially desgined for use with Makita power tools. The stop ring is commonly generally utilized to secure a component to a shaft or a spindle, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

This part is made of metal and is available individually. A wrench may be required to replace this part if it becomes broken or stripped. The hex nut fits between the drive gear and the gear housing. This is an authentic Makita replacement part that is sourced from the original manufacturer for use with angle grinders.

This is an original Makita replacement part. The screw is found in angle grinders. This part is made of metal, and is generally used to secure the wheel cover assembly into place. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a screwdriver when replacing this item. This part is sold individually.

Genuine Manufacturer Sourced replacement part used on a variety of Makita Power Tools. This is a Metal Pan-Head Screw and it is sold individually. This screws is commonly used to hold two pieces of Housing Set together.

This is an authentic Makita replacement part that is sourced from the original manufacturer for use with grinders, impact drivers, die grinders, chainsaws, and impact wrenches. The tapping screw is used with several different types of tools and the application of the screw can vary based on the model of equipment. The screw is sold as an individual replacement part.

This is genuine Makita replacement field that is specially manufactured for use with angle grinders. It is a vital component of an electric motor that powers the tool. A field generally is damaged by overloading the power tool. Please note, a faulty or damaged armature can further extend damage to the field. It is highly recommended to re...Read moreplace both carbon brushes when replacing a field. Includes one (1) field per order. Replacing a field is a relatively simple task that should only require a screwdriver and pliers. • Make sure the saw is unplugged • Remove the side handle • Remove the guard • Remove the gear housing • Remove the rear cover • Disengage the motor brushes • Remove the armature • Remove the baffle plate • Remove the switch button • Remove the old field • Install the new field • Reassemble and test the grinder

This is a Push-Button type switch that has 4 terminals, 2 internal and 2 external. This genuine Makita replacement part is sold individually. rnrnSwitches are commonly replaced parts in tools. A switch handles on/off and variable speed operations. They also have a role in electric breaking; they can momentarily reverse electrical polarit...Read morey. Because switches use mechanical internals, they will degrade and wear out over time, eventually needing replacement. Some common signs of a broken or failing switch are as follows: • The tool has completely stopped functioning - it will not start. • The tool operates intermittently, requiring multiple tries to turn on, until eventually it won't start at all. • The variable speed function and electric braking aren't working properly.

It is a high quality hardware that is sourced from original equipment manufacturer for use with Makita grinders and screwdrivers. This tapping screw is generally used to secure the gear housing. Please note one durable metal Phillips head screw per order.