Models > GA3271SXAA

GA3271SXAA Maytag Range - Overview

Sections of the GA3271SXAA

[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
LEVELER-FOOT,SCREW,F/S,NYLON – Part Number: W11665456
LEVELER-FOOT,SCREW,F/S,NYLON
★★★★★
★★★★★
(7)
PartSelect #: PS16875974
Manufacturer #: W11665456
This leveling leg is two inches long. It is all black in color and it is made entirely of plastic.
$27.01
  In Stock
Screw – Part Number: W11233072
Screw
★★★★★
★★★★★
(5)
PartSelect #: PS12349731
Manufacturer #: W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$26.51
  In Stock
Burner Head Cap with Spark Electrode – Part Number: WP3412D024-09
Burner Head Cap with Spark Electrode
★★★★★
★★★★★
(3)
PartSelect #: PS11741732
Manufacturer #: WP3412D024-09
This is a black burner head with the spark electrode. NOTE: This part has been updated and there is no longer a gasket seal required.
$89.16
  In Stock
Oven Rack – Part Number: WP7801P173-60
Oven Rack
★★★★★
★★★★★
(4)
PartSelect #: PS11744745
Manufacturer #: WP7801P173-60
Used in the lower oven. Sold individually.
$115.55
  In Stock
Screw – Part Number: WPW10348409
Screw
★★★★★
★★★★★
(1)
PartSelect #: PS11753384
Manufacturer #: WPW10348409
Sold individually.
$9.89
  In Stock
Door Seal – Part Number: WP7212P043-60
Door Seal
★★★★★
★★★★★
(5)
PartSelect #: PS11743947
Manufacturer #: WP7212P043-60
This door seal is fifty-three inches long. It is all black in color and is made of rubber. There are metallic clips sticking out of this seal at various points. These clips help to secure the seal to range doors.
$78.10
  In Stock
Anti-Tip Bracket – Part Number: WP3801F656-51
Anti-Tip Bracket
PartSelect #: PS11741944
Manufacturer #: WP3801F656-51
Sold individually.
$11.79
  In Stock
Screw – Part Number: WPY706189
Screw
PartSelect #: PS11757587
Manufacturer #: WPY706189
$10.25
  In Stock
Stand Mixer Screw – Part Number: WP4159193
Stand Mixer Screw
PartSelect #: PS11742292
Manufacturer #: WP4159193
This screw is sold individually.
$11.00
  In Stock
Screw – Part Number: WP98008545
Screw
PartSelect #: PS11747488
Manufacturer #: WP98008545
Sold Individually.
$10.35
  In Stock
Screw – Part Number: WP74003976
Screw
PartSelect #: PS11744049
Manufacturer #: WP74003976
This screw is sold individually.
$6.83
  In Stock
Thermostat Clip – Part Number: WP7112P004-60
Thermostat Clip
PartSelect #: PS11743926
Manufacturer #: WP7112P004-60
This clip is used to secure the thermostat bulb. They are sold individually.
$18.80
  In Stock

Questions And Answers for GA3271SXAA

Be the first to ask our experts a question about this model!

Common Symptoms of the GA3271SXAA

[Viewing 8 of 8]
Will Not Start
Fixed by
these parts
Fixing
Show All
Gas igniter glows, but will not light
Fixed by
these parts
Fixing
Show All
Oven not heating evenly
Fixed by
these parts
Fixing
Show All
Gas smell
Fixed by
these parts
Fixing
Show All
Element will not heat
Fixed by
these parts
Fixing
Show All
Little to no heat when baking
Fixed by
these parts
Fixing
Show All
Oven is too hot
Fixed by
these parts
Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
worn out door seal
removed old clips and remaining parts of old seal...new part already had clips attached, so just snapped them into holes in oven door.
Parts Used:
Door Seal
  • Stella from Charlotte, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
31 of 32 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner wouldn't start
Make a quarter turn counterclockwise, disengage a burner head, disconnect 2 wires, connect to a new head, install turn clockwise.

That's it!
Parts Used:
Burner Head Cap with Spark Electrode
  • Yury from Brooklyn, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
35 of 48 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven rack lost in a garage fire
First I opened the door to the oven. Then I opened the box that the part came in. (knife) I then slid the oven rack out of the box and unwrapped the plastic, being careful not to bend or scratch the new rack. Now, this is the tricky part... I had to move the existing rack down one space to make room for the new one. Then carefully slid the new rack in, tipping it slightly and sliding it in. LOL
Parts Used:
Oven Rack
  • Bob from Saint Clair Shores, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
29 of 37 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!