FWTR445RFS2 Frigidaire Washer - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Door Striker – Part Number: 131763302
$44.95
In Stock
Door Striker
★★★★★
★★★★★
(108)
Part #131763302
This part is found on the door of your washer and keeps your door closed for use.
Control Knob – Part Number: 131858004
$67.62
In Stock
Control Knob
★★★★★
★★★★★
(32)
Part #131858004
Sold individually. This white knob accepts a D-shaped shaft.
Shock Absorber Kit – Part Number: 5304485917
$64.85
In Stock
Shock Absorber Kit
★★★★★
★★★★★
(68)
Part #5304485917
This kit is used for front load washers and includes 2 dual-stage shock absorbers, 1 spare shock mounting pin and 4 locking nuts. These shock absorbers keep the washer from vigorous shaking during it's cycles.
Front Load Washer Door Lock and Switch Assembly – Part Number: 131763256
$205.66
In Stock
Front Load Washer Door Lock and Switch Assembly
★★★★★
★★★★★
(50)
Part #131763256
This door lock and switch assembly is manufactured to lock the door on your front load washer to prevent it from opening while it is running. You may need to replace the door lock and switch if the door does not open or lock. Your washer will not start if the door does not lock. This part is also known as a washing machine door lock assembly. As per the manufacturer, some models require a new wire harness and a door strike for this door lock assembly to work on the appliance. The original style lock would require the door lock kit.
Drain Pump - 60Hz 120V – Part Number: 137108000
$270.29
In Stock
Drain Pump - 60Hz 120V
★★★★★
★★★★★
(36)
Part #137108000
This drain pump helps your washer get rid of water during the cycle. If your machine isn’t draining properly or leaves water behind, this part could be the fix. It’s made to fit many front-load models and works with several well-known brands. Easy to install with basic tools—just be sure to unplug the washer first.
Drive Belt - 6 ribs – Part Number: 134051000
$35.95
In Stock
Drive Belt - 6 ribs
★★★★★
★★★★★
(12)
Part #134051000
This is a drive belt for your washing machine. This part spins the basket in your appliance by connecting the drive motor to the drive system. You will need to replace the drive belt if your pumps are not spinning, your washer is not agitating, or you are noticing excess noise and/or a burning smell. This belt is black with six ribbings. To replace this part, you will need a Phillips screwdriver.
Water Inlet Valve – Part Number: 134190200
$177.60
In Stock
Water Inlet Valve
★★★★★
★★★★★
(20)
Part #134190200
If your washer isn’t filling properly, leaking, or not cleaning clothes like it should, the water inlet valve might be the issue. This part controls how hot and cold water flows into your machine. It’s easy to install and comes with the bracket and screws you need. Just make sure it fits your model, and turn off the power and water before starting.
Tub-To-Pump Hose – Part Number: 131784700
$133.89
In Stock
Tub-To-Pump Hose
★★★★★
★★★★★
(10)
Part #131784700
This washer tub-to-pump hose is designed to carry wastewater from the tub to the drain pump during wash and spin cycles, helping ensure efficient draining. It also includes a built-in trap that catches small items like coins or debris, helping protect the pump from damage. Made from durable rubber, it is an ideal replacement if the hose becomes cracked, blocked, or starts leaking, restoring proper drainage and reliable washer performance.
Drum Vane – Part Number: 131274600
$83.73
In Stock
Drum Vane
★★★★★
★★★★★
(7)
Part #131274600
Also known as a Drum Baffle. Sold individually.
Bellow with Clamp – Part Number: 5303937187
$176.86
In Stock
Bellow with Clamp
★★★★★
★★★★★
(5)
Part #5303937187
This door bellow kit forms a watertight seal between the drum and door of front-load washers, allowing the tub to spin freely while preventing leaks. It fits a variety of models and is commonly replaced when water leaks, the door doesn’t seal properly, or the washer makes unusual sounds. Installation restores proper sealing and helps maintain efficient washer performance.
Screw – Part Number: 131302800
$28.95
In Stock
Screw
Part #131302800
This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. The main reason you would replace this screw is if the old screw is missing or damaged. This part is sold individually and is an OEM part sourced directly from the manufacturer.

Manuals & Care Guides for FWTR445RFS2

Click to download

Common Symptoms of the FWTR445RFS2

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken Door Catch
574 of 593 people found this instruction helpful.
  • Joy from Columbia, MO
  • Really Easy
  • Less than 15 mins
  • Screw drivers
This was one of the simpliest repairs I have ever done taking less than 5 minutes to complete. On the inner door I removed the two screws that hold the plastic catch in place. I then removed the broken catch and put the new catch in place. Finally I replaced the two screws that hold the catch in place and it was done.
Was this helpful?
Thank you for voting!
Door on washer wouldn't lock or start
477 of 565 people found this instruction helpful.
  • DOUG from KING FERRY, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
1. Unplug unit.
2. Unscrew 2 nuts holding top in place in rear of unit using phillips head screwdriver.
3.Slide top back and remove.
4. Open door of washer and unscrew 2 screws holding in door lock unit.
5.Pull out unit from the top and install new unit reconnecting the 3 wire connections.
Was this helpful?
Thank you for voting!
Both vibration shock absorbers broken
181 of 197 people found this instruction helpful.
  • Douglas from Medical Lake, WA
  • Easy
  • 30 - 60 mins
  • Screw drivers, Socket set
removed 2 screws and removed top access cover. removed 2 screws and removed front access cover. removed 4 retaining pins (one with nammer and punch because it was stuck) connected lower ends of new shocks with plastic pins, extended each shock to slip fit and connected upper ends to wash tub mounts. Reinstalled panels. I wish I could sa y that it all went well from there but......when the shocks broke, apparently the hit the motor took was enough to cause an electronic failure of the speed cycle control chip. Now Im waiting for that part.
Was this helpful?
Thank you for voting!