The relay switch may also be known as the door micro switch and is a part for your microwave. The function of this part is to monitor the door latch and communicate whether the door latch is open or c...
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
December 3, 2021
Makes louder noise than normal and won't heat.
For model number FPMO209RFB
Hello Mike, thank you for your question. A defective capacitor may be why your microwave is not heating and you are hearing a loud noise. The capacitor will have to be tested to determine if this is the cause of your problem. To avoid electrocution, make sure you discharge the capacitor before you test it. You can do this with a screwdriver that has an insulated handle. When testing your capacitor set your meter to 1000 ohms. Touch your probes to the terminals on the part. If your meter stays on 0 then your capacitor needs to be replaced. Part number PS3409696 We hope this helps!
Hi Brian, thank you for the question. According to our research, the most probable cause of this issue could be a faulty control board, part number PS11770657, and may need to be checked. We hope this solves your problem!
Tray was dropped and shattered. Can it be teplaced
For model number FPMO209RFB
Hi Liz, thank you for reaching out. The part you are looking for is the turntable tray, part number PS16620620. If you need help placing an order, customer service is open 7 days a week!
The electronic display is so light you cannot read it. What part can I buy to fix it?
Thank you!! Gail
For model number FPMO209RFB
Hello Gail, thank you for getting in touch. You may need to replace the control board, part number PS11770657, to fix the issue. Glad to be of assistance!
the microwave does not heat and makes a load humming noise and the rest of the unit works normal
For model number FPMO209RFB
Hello Darrell, thank you for your inquiry. We believe your microwave is having this problem because of the faulty magnetron. We would suggest replacing the magnetron, part number PS12728994, to solve the problem. Glad to be of assistance!
I first removed the top plate above the microwave door (3 screws), then I removed the plate containing the buttons and clock. The microwave has 3 relay switches and they are in a little holder. The holder was too difficult to remove so I just removed the bottom switch and replaced. The microwave started right up.
Removed the 3 screws to drop the lower panel and, removeed the turn table plate and ring. Then removed the 2 screws holding the motor, the 2 wires attached to the motor and removed the old motor.Replaced the new motor in the reverse order. DO NOT FORGET TO UNPLUG THE MICROWAVE FIRST.
was told buy a repair person to check the door micro switches as it was a common problem. removed the top plastic air grill to get access to the screw that holds in place the control cover. After unplugging the unit, i took out the (2) screws that held in the switches and removed them (3). One switch was a bit melted so i tested it with a 12 volt battery and it was bad. Ordered a new one from Part select and got it fast . Works great .