Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
April 13, 2026
Not working getting good air psi trigger works push a board and just air
For model number FN250C
Hello Robert, thank you for contacting us. According to our research, the O-ring has likely dried out or cracked, causing it to lose its airtight seal against the cylinder wall. This prevents the tool from building enough pressure to shove the driver blade down, letting air blow past the piston and out the exhaust instead. You may need to replace it. The part number is PS10183608. We hope this sorts out your problem!
