FMR14 Electrolux Freezer - Overview

Diagrams for FMR14

See every part. Know exactly what you need.

Parts for the FMR14

$24.41

SCREW

Part #216858001

Sold Individually.

$89.00

Run Capacitor

★★★★★

(1)

Part #218909912

If your fridge isn’t cooling like it used to, this run capacitor might be the fix. It helps the compressor motor start and stay running by managing the flow of electricity. A faulty capacitor can lead to problems like the fridge running too long or not cooling properly. This 220-volt, 12-microfarad part is easy to replace—just be sure to unplug your appliance first for safety.

$84.34

Gasket Retainer Clip Kit - 24 Pieces

Part #5303922007

These are used to hold your gasket in place.

$21.39

Door Closing Cam - White

★★★★★

(2)

Part #216503300

$27.49

Hinge Bearing

Part #297006800

$46.95

Filter - Drier

Part #5303305677

Refrigerant system filter/dryer.

$33.62

Drain Hose

Part #5304512272

HINGE-UPPER

Part #216939100

$29.50

Compressor Mounting Grommet

Part #216498900

$76.68

Start Device

Part #216954200

Recessed Handle

★★★★★

(1)

Part #297034202

$28.95

Drain Pipe

Part #5304511843

Manuals & Care Guides for FMR14

Click to download

Wiring

Wiring Diagram

(0.26MB)

Common Symptoms of the FMR14

How this model fails, and the parts that fix it.

Freezer section too warm

Fixed by
these parts

Show All

Fridge and Freezer are too warm

Fixed by
these parts

Show All

Videos related to the FMR14

Watch our pros, then fix it yourself.

Replacing the Run Capacitor

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Freezer wouln't start

7 of 11 people found this instruction helpful.

Ivette from Grand Island, NY
Really Easy
Less than 15 mins
Screw drivers

First I removed the clamp, pulled out the part, and diconnected the two wires on the side and a small screw. Reconnected the new part with the small screw, connected the wires and plugged the part back to the side of the motor. Whaa La, Done.

Was this helpful?

Freeze would not re-start after temp rose above 23 degrees.

2 of 2 people found this instruction helpful.

Andy from GOOSE CREEK, SC
Really Easy
15 - 30 mins
Screw drivers

Unplugged the freezer. Located the Run Capacitor (next to the compressor). Removed the wire holding bracket, removed the Run Capacitor from the Start Relay. Installed the NEW Capacitor, re-installed the holding bracket. Plugged the unit in, looking at the display for the proper start-up sequence data. All is good - freezer operating for a ... Read more

Read less

Was this helpful?