This part is a genuine OEM part. This grey lower dish rack assembly comes with eight light-gray rollers for easy access. The dish rack is approximately 21 inches wide x 22 inches deep. The dish rack holds dishes in place during the dish washing cycle. If you see rust spots on the dishes, the lower rack will not pull out, or the lower rack...Read more is visibly rusted or damaged, you will need to replace the part. Other common symptoms include: unusual or loud noises coming from the unit, or the dishes on the lower rack not being washed properly.
This round glass tray fits select microwaves and measures about 13 1/2 inches across. It holds food and turns during cooking to help heat it more evenly. The tempered glass has grooves underneath that connect with the turntable support or center coupler. Replace the tray if it is cracked, chipped, broken, or no longer turns correctly.
This microwave door switch works with the door latch to control when the appliance can run, a worn switch may cause the microwave to lose power, fail to start, or trip a breaker, it fits select upper and lower switch locations, high voltage may remain inside the microwave after power is removed, use a trained technician for installation, confirm fit with the exact model number.
Sold individually. Product Description Charcoal air filter works with some Frigidaire, Electrolux, White Westinghouse, and Tappan models of microwaves. This is a genuine OEM part that works for some models of Frigidaire, Electrolux, White Westinghouse, and Tappan models.
This microwave waveguide cover protects key internal components by blocking food particles, grease, and moisture from entering the waveguide area. Located on the interior wall of the microwave, it helps ensure safe and efficient operation. Replacement is recommended if the cover is cracked, burned, or causing sparking, helping prevent further damage and maintain proper performance.
A loose door, repeated clicking, or intermittent operation can indicate a damaged latch body or switch holder. The housing aligns the safety switches with the door hooks and helps prevent operation while the door is open. First inspect the latch opening, door alignment, mounting tabs, and switches to identify every damaged component. Matc...Read moreh the replacement to the microwaves full model number and verify what the assembly includes. Unplugging does not remove the high-voltage capacitor hazard, so professional service is recommended. Do not test the appliance with covers removed or safety interlocks bypassed.
This coupler is a replacement mechanical component used to connect and transfer motion between internal assemblies. It is commonly replaced when wear causes slipping, noise, or loss of function.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
3
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gary - For model number FGMV17WNVFA
May 29, 2023
REPLACEMENT DOOR HANDLE FOR FRIGIDAIRE GALLERY MICROWAVE.
Hi Gary, thank you for reaching out. The part you are looking for is the door handle, part number PS12071383. We hope this helps!
The clock in the door display has stopped working, Is there a replacement part?
Hi William, thank you for contacting us. The display screen is attached to and controlled by the control board, part number PS12718119, and the issue in your case might probably be with the control board. We hope this information helps!
The grease filters for this microwave did not come with it.....they were supposed to come separate from the appliance and either got lost during installation or never came. I would like to order these if possible.
Hello Kathleen, thank you for contacting us. We have researched the model you have provided and have found that the part you are looking for is part number PS12585760. If you would like assistance placing an order, please contact customer service. Good luck with your repair!
Hi Helen, thank you for your inquiry. According to our research, the control panel assembly, part number PS12718117, is compatible with your model number. You will need to replace it to fix the issue. Glad to be of help!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave tripped circuit breaker when turned on
41 of 68 peoplefound this instruction helpful.
Arthur from LUTZ, FL
Easy
15 - 30 mins
Screw drivers
Remove vent cover then remove touch screen control panel. When you remove control panel take photo of where everything is plugged in then unplug and remove control panel. 3 door switches located next to door in a plastic chassis. Test each switch with current tester. Remove the bad switch and replace with the new one. You tube DIY helped.
Was this helpful?
Thank you for voting!
Old rack had broken tines and rust
21 of 23 peoplefound this instruction helpful.
Karen from Alachua, FL
Really Easy
Less than 15 mins
No repair, just replaced the lower rack. Your service is awesome. I received my shipment next day. Thank you so much. I will definitely use your service again.
Was this helpful?
Thank you for voting!
Power would not come on, would trip breaker when connected.
18 of 28 peoplefound this instruction helpful.
JOSEPH from MIAMI, FL
Easy
15 - 30 mins
Screw drivers
First thing I dir was search YouTube for any related videos and found this one https://www.youtube.com/watch?v=uHj4H9Fdxrc, it was the exact problem my microwave was exhibiting. Once I verified the problem by troubleshooting, I removed the part and verified that the switches were working fine, the door latch assembly showed signs of wear
... Read morewhich was the cause of the problem. After receiving the replacement part I installed it, verified that power was restored to the unit and reassembled the microwave, works fine, hope it lasts a long time!
My Orders
